X hits on this document

Word document

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS AUGUST 2009 - page 6 / 16

37 views

0 shares

0 downloads

0 comments

6 / 16

NATIONAL PARTITIONS PRODUCT SPECIFICATIONS                   AUGUST 2009

National Partitions, Inc. 10300 Goldenfern Lane, Knoxville, TN 37931

PHONE:  865-670-2100:  FAX:  865-670-2200; WEBSITE:  www.n-p.com

© Copyright 2009, Authorized use is strictly limited to parties writing specifications for National Partitions projects.

E.Electric components shall be certified by Underwriters Laboratory (UL), Inc. and shall bear UL labels.

*****  Include the following paragraph if glazed windows or doors are required.  *****

F.Safety glazing:  Comply with CPSC 16 CFR 1201, ANSI Z97.1, and other applicable safety requirements.  Each piece of safety glazing shall be permanently labeled with appropriate marking.

1.6DELIVERY, STORAGE, AND HANDLING

A.Package prefabricated, pre-finished components with protective film and other material such that components and finishes are not damaged during transporting, unloading, storing at site, and erection.

B.Label shipping crates to identify contents.  Provide bill of materials listing components with same designations as used on installation drawings.

C.Upon arrival, inspect components and verify quantities as indicated on bill of materials.  Immediately remove and replace damaged components.

D.Store materials out of weather in dry place.  Provide ventilation.  Do not store on site for prolonged period.

E.Handling:  Avoid bending, gouging, scratching, and denting walls panels and other components.

1.7WARRANTY

*****  10 years warranty is provided only if Hi Wall structures are erected within a building.  *****

A.Provide under provisions of Section 01780 - Closeout Submittals:  10 years warranty for system components to cover defects in material and workmanship.

PART 2 - PRODUCTS

2.1ACCEPTABLE MANUFACTURERS

A.National Partitions, 10300 Goldenfern Lane, Knoxville, Tennessee 37931; 800-327-3697; www.n-p.com.

B.Requests to use equivalent products of other manufacturers shall be submitted in accordance with Section 01630 - Product Substitution Procedures.

2.2SYSTEM COMPONENTS

______________________________________________________________________________

PREFABRICATED ROOMS [Using Hi Wall System]13031-F - 6

Document info
Document views37
Page views37
Page last viewedFri Oct 28 11:06:59 UTC 2016
Pages16
Paragraphs353
Words5065

Comments