X hits on this document

50 views

0 shares

0 downloads

0 comments

1 / 16

Evaluation Board for the AD7793 24-Bit, Low Power Sigma-Delta ADC (3 Channels)

EVAL-AD7793

FEATURES

Full-featured evaluation board for the AD7793 Standalone USB interface Various linking options PC software for control of AD7793

GENERAL DESCRIPTION

With a gain of 64 and the update rate programmed to 16.7 Hz, the rms noise is 85 nV. Simultaneous 50 Hz/60 Hz rejection is available at this data update rate also.

Full data on the AD7793 is available in the AD7793 data sheet available from Analog Devices, Inc., and should be consulted in conjunction with this data sheet when using the evaluation board.

This data sheet describes the evaluation board for the AD7793, which is a low power, 24-bit sigma-delta (Σ-) ADC. The AD7793 is a complete analog front end for low frequency measurement applications. It contains three differential inputs and includes a low noise instrumentation amplifier, an embedded reference, and programmable current sources. The update rate can be varied from 4.17 Hz to 470 Hz. It also has an on-board clock, eliminating the need for an external clock. It employs a Σ- conversion technique to realize up to 24 bits of no missing codes performance. The input signal is applied to an analog modulator. The modulator output is processed by an on-chip digital filter. The analog input channel of the AD7793 accepts analog input signals of ±VREF/gain, with gain equal to 1 to 128.

The evaluation board interfaces to the USB port of an IBM- compatible PC. Software is available with the evaluation board that allows users to easily communicate with the AD7793.

Note that the AD7793 evaluation board software should be installed before connecting the AD7793 evaluation board to the PC.

Another component on the AD7793 evaluation board is the ADP3303 high precision, low power, 3.3 V output voltage regulator, which is used to power the USB/SPI interface.

FUNCTIONAL BLOCK DIAGRAM

AVDD

VOLTAGE REGULATOR

TEMPERATURE SENSOR

ANALOG

AD7793

SPI/USB

LabVIEW™

INPUTS

INTERFACE

BASED

Figure 1.

PC AND

SOFTWARE

07580-001

Rev. 0 Evaluation boards are only intended for device evaluation and not for production purposes. Evaluation boards are supplied “as is” and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. No license is granted by implication or otherwise under any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the right to change devices or specifications at any time without notice.Trademarks and registeredtrademarks are the propertyof their respective owners. Evaluation boards are not authorized to be used in life support devices or systems.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700 Fax: 781.461.3113

www.analog.com ©2008 Analog Devices, Inc. All rights reserved.

Document info
Document views50
Page views50
Page last viewedWed Jan 18 06:42:07 UTC 2017
Pages16
Paragraphs312
Words2975

Comments