X hits on this document

115 views

0 shares

0 downloads

0 comments

19 / 37

General Functions

Les Paul Standard 2010 Limited defaults to settings that are wellsuited to the vast majority of players. However, it is possible to change many of these defaults via Function Mode (Red Bank). Function Mode is also where you can change strings easily, intonate your strings, activate a chromatic tuner, and more.

The general procedure is to enter Function Mode, choose the MCK position that corresponds to a particular function, push Enter for more than one second, then edit the selected function.

5.0 Entering Function Mode

  • If Les Paul Standard 2010 Limited is not poweredup, pull the MCK out and push Enter four times in

quick succession.

  • If Les Paul Standard 2010 Limited is already in a Bank other than the Red Bank, push Enter in quick

succession until the Red Bank appears.

5.1 Selecting a Function

Once Les Paul Standard 2010 Limited is in Function Mode, rotate the MCK to choose the position that corresponds to a particular function. Upon selecting a position, the Display Matrix will show a red letter for the function ID, then scroll through a series of white letters that give an abbreviated function

name. The following chart shows the details. MC Pos. ID Abbreviation Function

MCK Pos. Peg I C E A D G

ID T I C R Up arrow Down arrow U

Abbreviation TUNER INT CUS REF UP DWN USR

The followin

g describes th

e various functions.

Function Chromatic tuner function Adjust LP STD 2010 Limited intonation Create custom tuning Sets reference pitch (e.g., A = 440) Tune replacement string(s) up to pitch Tune string(s) down for removal Access user banks

5.2 Chromatic Tuner (Position = Peg, ID = T)

The chromatic tuner detects a plucked string and displays the nearest note and frequency offset compared to that note.

Document info
Document views115
Page views115
Page last viewedSun Dec 11 02:34:51 UTC 2016
Pages37
Paragraphs875
Words14062

Comments