Function 19 Value
Neck tension sensitivity Result
0 through 9
Sets degree of string sensitivity to other strings' pitch changes
Default = 9 Clickstream
19 § 0‐9 §
Note: This determines how strongly one string's pitch change is taken into consideration for the other strings. 0 = Lowest
sensitivity, strings are rarely retuned, lowest precision but best performance. 9 = Highest sensitivity, strings are often retuned, best precision, but potentially worse performance.
Function 20 Value
Instant Access Tuning time Result
50 through 255
Sets time in ms/10 between system activation and start of the IAT process
Default = 100 Clickstream 20 § 50‐255 §
Function 21 Value
Tuning select time Result
15 through 255
Sets time in ms/10 between selecting a tuning and when tuning begins
Default = 35 Clickstream
21 § 15‐255 §
Note. Sets the time between selecting a tuning with the MCK and actually starting the tuning process. Increasing the time reduces the stress on the relays that are switched when starting the tuning process, as fewer activations take place when scrolling slowly through the menu. This setting has an effect in Tune Mode and in Preset Mode if “Preset Bank
Mode” is set to Preset Activation.
Function 22 Value
Sound select time Result
1 through 255
Sets time in ms/10 between selecting a sound and activating it
Default = 10 Clickstream
22 § 15‐255 §
Note: This option determines whether the tuning process starts automatically when entering Tune Mode (Blue Bank). If
value = 1, the tuning process starts automatically. If value = 0, the behavior is the same as Preset Mode (Yellow Bank) and
the tuning process beings only after selecting a tuning
Function 23 Value 0 1
Auto retune Result Auto retune is disabled Auto retune is enabled
Default = 1 Clickstream 23 § 0 § 23 § 1 §
Note: This option determines whether the tuning process starts automatically when entering Tune Mode (Blue Bank). If value = 1, the tuning process starts automatically. If value = 0, the behavior is the same as Preset Mode (Yellow Bank) and the tuning process beings only after selecting a tuning.
Function 24 Value 0 1
Preset bank mode Result Loads sound and tuning in Preset Mode (Yellow Bank) Loads sound only in Preset Mode (Yellow Bank)
Default = 0 Clickstream 24 § 0 § 24 § 1 §
Note: This switch determines how a preset is loaded in Preset Mode (Yellow Bank). If value = 0, both the preset tuning and sound are activated. This causes the system to start the tuning process on preset activation. If value = 1, only the preset's sound is loaded. Activating the tuning is still possible by pushing Enter for more than one second.
Following are additional setup mode functions for doing a variety of system resets; these follow the same basic procedures as the previous setup functions.