X hits on this document

114 views

0 shares

0 downloads

0 comments

30 / 37

Caution: The following setup functions are servicing procedures, and are included for completeness. Be aware that resetting sounds, tunings, or user banks will delete any custom sounds, tunings, or user bank settings you've created. Before doing any resets, Gibson advises saving all custom sounds using the Gibson Chameleon Editor software.

Function 99

Display software version: Shows Dusk Tiger's current software

Result Show current Dusk Tiger software version Note: There is no default as this is a readonly parameter

Clickstream 99 §

hange your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”

Reset sounds: Resets all Green Bank sounds to factory defaults Result Do the clickstream on the right, then rotate the MCK fully counterclockwise Press the Display Matrix momentarily, then wait for the red “?” to appear Rotate MCK to the cyan “Y” (“Yes”), then press the Display Matrix momentarily Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily To exit, push Enter for more than one second. hange your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”

Clickstream 103 §

Reset presets: Resets all Yellow Bank presets to factory defaults Result Do the clickstream on the right, then rotate the MCK fully counterclockwise Press the Display Matrix momentarily, then wait for the red “?” to appear Rotate MCK to the cyan “Y” (“Yes”), then press the Display Matrix momentarily Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily To exit, push Enter for more than one second. hange your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”

Clickstream 104 §

Clickstream 101 §

Clickstream 102 §

Step 1 Step 2 Step 3 Step 4 Step 5 Note: If you c

Function 104

Step 1 Step 2 Step 3 Step 4 Step 5 Note: If you c

Function 103

Note: If you change your mind about resetting, in Step 3, choose “N” (“No”) instead of “Y.”

Function 101

Reset tuning config data: Resets to standard tuning, default precision, etc.

Step 1 Step 2 Step 3 Step 4 Step 5

Result Do the clickstream on the right, then rotate the MCK fully counterclockwise Press the Display Matrix momentarily, then wait for the red “?” to appear Rotate MCK to the cyan “Y” (“Yes”), then press the Display Matrix momentarily Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily To exit, push Enter for more than one second.

Function 102

Step 1 Step 2 Step 3 Step 4 Step 5

Note: If you c

Reset tunings: Resets all Blue Bank tunings to factory defaults

Result Do the clickstream on the right, then rotate the MCK fully counterclockwise Press the Display Matrix momentarily, then wait for the red “?” to appear Rotate MCK to the cyan “Y” (“Yes”), then press the Display Matrix momentarily Rotate MCK to the “Enter” sign, then press the Display Matrix momentarily To exit, push Enter for more than one second.

Function 105

Step 1

Reset modifiers: Resets runtime correction and calibration data Result Do the clickstream on the right, then rotate the MCK fully counterclockwise

Clickstream 105 §

Document info
Document views114
Page views114
Page last viewedSat Dec 10 22:28:00 UTC 2016
Pages37
Paragraphs875
Words14062

Comments