X hits on this document

362 views

0 shares

0 downloads

0 comments

29 / 73

Troubleshooting

Console Elements Wrong Size or Wrong Position for Your Computer Screen—Are the elements of your jOrgan console too small to look right on your screen? Or maybe so large that everything won’t t on the screen at the same time, even when you’ve toggled the F11 key (full screen). ere is a zoom control that expands and contracts your jOrgan console elements. e expansion is from top left (top most, left most) position to lower right.

Place jOrgan in Construct Organ mode (click on the “Construct Organ” icon). In the View menu select “Skin.” A skin tab will appear at the bottom of the screen where your “jOrgan” and “Problems” tabs appear. Click and drag the bar above the tabs so that there is an inch or two of space below the “Skin” tab then scroll down the Elements list until you reach the console element. Typically the console element has the name of the disposition you’ve chosen. Its name is preceded in the elements list by a console icon (a small picture of a computer monitor).

Now that space you created will be lled with pictures (icons) of elements of your console, elements such as stop tabs and preset buttons. In the upper right corner of this space you will see a slider. It will probably be showing somethinglike 75%, 82%, etc. Using a trial-and-error approach, make adjustments to this slider as necessary to make your jOrgan console the ideal comfortable size for your screen.

Revised 2/8/2010

3.12

Revised 2/8/2010

Document info
Document views362
Page views369
Page last viewedSat Dec 10 09:20:20 UTC 2016
Pages73
Paragraphs1085
Words20880

Comments