X hits on this document

645 views

0 shares

0 downloads

0 comments

12 / 78

6.

“A Fluid Cushion Truly Triaxial or Multiaxial Testing Device,” (S. Sture and C.S. Desai), ASTM, Geotechnical Testing Journal, Vol. 2, No. 2, March 1979, pp. 20-33.

7.

“Three-Dimensional Geometric and Material Nonlinearities: Analysis of Some Problems in Geomechanics,” (H.V. Phan, C.S. Desai, S. Sture and J.V. Perumpral), Proc. Third Int. Conference on Numerical Methods in Geomechanics, (ICONMIG), Aachen, West Germany, Vol. 1, April 2-6, 1979, pp. 67-75.

8.

“Development of a Constitutive Law for an Artificial Soil,” (S. Sture, C.S. Desai, and R. Janardhanam), Proc. Third Int. Conference on Numerical Methods in Geomechanics, (ICONMIG), Aachen, West Germany, Vol. 1, April, 1979, pp. 309-317.

9.

“Data Reduction and Applications for Analytical Modeling,” (H.-Y. Ko and S. Sture), State of-the-Art Paper, ASTM Symposium on Shear Strength of Soils, Chicago, Illinois, June 1980, ASTM Special Technical Publication 740, pp. 329-386.

10.

“Measurement of Swelling, Hydraulic Conductivity, Compressibility, and Shear Strength in a Multistage Triaxial Test,” (J.C. Parker, S. Sture and D.F. Amos), Journal Soil Science Society of America, S-228. Vol. 44, No. 6, December 1980, pp. 1133-1138.

11.

“The Potential of Soil Dynamics Research in Space,” (N.C. Costes and S. Sture), Proc. Int. Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics,  St. Louis, Missouri, Vol. 3, April-May, 1981, pp. 929-959.

12.

“A Procedure for Developing Constitutive Models for Soils,” (S. Sture) Proc. Symposium Implementation of Computer Procedures and Stress-Strain Laws in Geotechnical Engineering, Chicago, Illinois, Vol. 2, 1981, pp. 561-574.

13.

“Procedure, Selection and Application of Plasticity Models for a Soil,” (C.S. Desai, H.V. Phan, and S. Sture), Int. Journal for Numerical and Analytical Methods in Geomechanics, Vol. 5, No. 3, 1981, pp. 295-311.

14.

“Evaluation of Constitutive Parameters for Geologic Materials,” (C.S. Desai, P.V. Lade, S. Sture and H.J. Siriwardane), Workshop lecture series book, Acorn Press, Chicago, Illinois, 1981, 155 pages.

15.

“Modeling of Elastic-Plastic Anisotropic Hardening and Rotating Principal Stress Directions in Sand,” (J. C. Mould, S. Sture and H.-Y. Ko), Proceedings, International Union of Theoretical and Applied Mechanics (IUTAM) Symposium on Deformation and Failure of Granular Materials, Delft, 31 August-3 September, A.A. Balkema Press, The Netherlands, 1982, pp. 431-439.

16.

“Numerical and Centrifugal Modeling of Excavations in Sand,” (H.-Y. Ko, R. Azevedo and S. Sture), Proceedings International Union of Theoretical and Applied Mechanics (IUTAM) Symposium on Deformation and Failure of Granular Materials, Delft, 31 August-3 September, Publisher A.A. Balkema Press, The Netherlands, 1982, pp. 609-614.

17.

“Elastic-Plastic Anisotropic Hardening Constitutive Model and Prediction of Behavior for Dry Quartz Sand,” (S. Sture, J.C. Mould, and H.-Y. Ko), Proceedings International Workshop on Constitutive Behavior of Soils, Grenoble, France, September 6-8, 1982, Vol. 2, pp. 193-241.

18.

“High Capacity Multiaxial Testing Device,” (C.S. Desai, R. Janardhanam and S. Sture), ASTM, Geotechnical Testing Journal, Vol. 5, No. 1/2, 1982, pp. 26-33.

19.

“Numerical Modeling of Strength and Deformation Behavior in the Direct Shear Test,” (J. Christensen, K. Ickert, T. Stankowski, S. Sture and K. Willam), Proc. Int. Conf. Constitutive Laws for Engineering Materials, Tucson, Arizona, Jan. 10-14, 1983, pp.

Document info
Document views645
Page views645
Page last viewedSun Dec 04 22:19:52 UTC 2016
Pages78
Paragraphs2437
Words27185

Comments