“Evaluation of Physical Length Scale for Granular Materials”, (H. Arslan and S. Sture), J. Computational Material Science, ScienceDirect, Nov. 2007, 6 p., in print March, 2008.
“Elastodynamics Solution for a Transversely Isotropic Tri-Material in Full-Space”, (M. Eskandari-Ghadi, S. Sture, A. Ardeshir-Behrestaghi), Proc. 18th ASCE Engineering Mechanics Conference, Univ. of Minnestota, Proc CD, May, 2008.
“A Damage Theory Based on Composite Mechanics”, (Y. Xi, M. Eskandari-Ghadi, S. Sture), proc. 18th ASCE Engineering Mechanics Conference, Univ. of Minnesota, proc. CD, May, 2008.
“Three-dimensional Ellipsoidal Discrete Element Modeling of Dense Dry Granular Materials”, (R. Regueiro, S. Sture), Int. J. Num. Analytical Methods in Geomechanics., 2008.
“An Improved Multiaxial Cubical Cell and Its Application to the Testing of Anisotropic Materials,” (S. Sture) M.S. Thesis, University of Colorado, Boulder. Submitted to the U.S. Department of the Interior, U.S. Bureau of Mines, Grant No. GO 11089, 176 pages.
“Strain-Softening Behavior of Geologic Materials and Its Effect on Structural Response,” (S. Sture) Ph.D. Dissertation, University of Colorado, Boulder. Submitted as Technical Report to the U.S. Department of the Interior, U.S. Bureau of Mines, Grant No. 01550156, July 1976, 342 pages.
“Geometric and Material Nonlinear Three-Dimensional Finite Element Analysis for Structures Moving in Ground,” (C.S. Desai, S. Sture, J.V. Perumpral, and H.V. Phan), Report No. VPI-E-78.11, Annual Report to NSF, Virginia Polytechnic Institute and State University, 182 pages.
“Development of a Multiaxial Cubical Test Device with Pore Water Pressure Monitoring Facilities,” (S. Sture) Report No. VPI-E-78.21, Annual Report to NSF, Virginia Polytechnic Institute and State University, 78 pages.