X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 13 / 34

102 views

0 shares

0 downloads

0 comments

13 / 34

Tools for Changing Springs and Shock Absorbers

KL-0015 Universal Spring Compressor (Patented)

(e.g. US-Patent 4 976 416)

This legendary Spring Compressor remains after more than 20 years still the best on the market.

No other unit has been sold so successfully in the past, and so widely used in the repair of MacPherson Struts.

The particular advantages are:

  • An ever-increasing range of Jaws are available to respond to the ever- differing applications required by the latest vehicle types (Pat.)

  • Exchangeable Protective Plastic Jaw Inserts are available to prevent damage to the coating of the coil-springs (German Utility Model)

  • Conical or Barrel springs may be easily and safely compressed using the Adaptor KL-1590-1

  • Fully approved by BGS after Safety Tests

  • Universal for MacPherson- Struts and Semi-Struts

  • Extended working travel of 300mm allows long coil-springs to be removed and replaced

  • Patented Self-locking of the moving Jaw-holder under load of the compressed spring is not borne by the Spindle (Pat.)

  • Minimum Distance between

Jaws of 50mm Important for very short springs

  • Spindle Drive fully rated for use

with Air Impact Gun

  • Case hardened cylinder body

Max. Load 17 500 N

For Coil-Springs with Ø 70-240 mm

Leading Car manufacturers have chosen the KL-0015 Spring Compressor.

VW- Audi, BMW, Ford and Opel-Vauxhall prescribe the use of Protective Jaw-inserts for compressing coil-springs in order to prevent the risk of spring breakages resulting from corrosion arising from damage to the outer coating.

1-13

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1n

1

Document info
Document views102
Page views102
Page last viewedTue Dec 06 15:40:20 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments