X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 17 / 34

105 views

0 shares

0 downloads

0 comments

17 / 34

Tools for Changing Springs and Shock Absorbers

KL-1516-SP

KL-1516-SP Jaws (Pair) size 1C

complete with Protective Inserts

size 1C

Suitable for Audi A4 rear-axle from 2001.

KL-1540 (German Utility Model)

This newly-developed pair of Jaws used in conjunction with Spring Compressor cylinder KL-0015-100 allows the removal and replacement of the rear coil-springs in just a few minutes, without the need to dismantle the wish-bone or to drop the rear sub-frame. This method removes the need to perform a wheel-alignment after rear coil-

springs have been replaced. Jaws-Ø:...... 80-150 mm

Weight:............1.850 g

KL-1540

Jaw Set Size 4 (4 Pcs.) (German Utility Model)

Special Jaws for BMW

German Utility Model

Application: VW Golf, Bora, 4x4 Off Roaders (4 Motion) Advantage:

  • Eliminates removal of the rear axle.

  • Eliminates an additional re-alignment of rear axle geometry.

  • Eliminates dismounting shock-absorber and Drive-Shaft.

These specially-formed Jaws are essential to remove and replace rear springs.

KL-1525

Part-No.

Description Jaw Set Size 4

KL-1540 consists of :

KL-1541 KL-1543 KL-1545 KL-1547

Jaw Size 4 left lower Jaw Size 4 left upper Jaw Size 4 right lower Jaw Size 4 right upper

KL-1571

KL-1521-S

KL-1575

Special Jaws for BMW

KL-1570-1

Jaw KL-1525 and the associated protection insert KL-1521-S allows compression of the front springs on BMW E46 (3-series from ’98), E39 (5-series from ’95) in conjunction with the Ring Jaw KL-1571 and with the corresponding adaptor-ring KL-1575.

German Utility Model

  • KL-1525 Jaw size 2B The Jaw KL-1525 provides a steeper helix

(rise per 360° rotation) than the normal Jaw size 2

(KL-1521).

KL-1525

  • KL-1521-S Protective Insert size 2N for use with Jaw KL-1525.

  • KL-1571 Ring-Jaw suitable for BMW E31 (8-series) in conjunction

with Jaw size 2N, and for E46 (3 series from ’98), E39 (5 series

from ’95) in conjunction with Adaptor-Ring KL-1575.

opening-Ø: ............. 139 mm

Inner-Ø:

....165 mm

KL-1521-S

KL-1575

  • KL-1575 Insert-Ring for Ring-Jaw KL-1571 suitable for BMW E46

(3 series from ’98), E39 (5 series from ’95) front coil springs.

opening-Ø:............. 139 mm

Inner-Ø: ....160 mm

KL-1590-1

KL-1570-1

Jaw Set BMW

contents:

Part-No. KL-1525 KL-1521-S KL-1575

Jaws-Ø 155-195 mm 155-195 mm 160 mm

Description Jaw Size 2B Protective insert Size 2N Insert-Ring for KL-1571

KL-1590-2

KL-1590-1

KL-1590-1 Adaptor for Conical springs

Application Alfa Romeo, Chrysler, Nissan, Seat Arosa, VW Lupo etc. Allows safe compression of conical springs with KL-0013,

KL-0015 and KL-2000 Spring Compressors.

KL-1590-2 Adaptor-Set

Note: Vehicle Application List see page 1-24 and 1-25.

For extending the jaws e.g. for compressing the Rear Springs or Barrel Springs. (Consists of 2x KL-1590-1).

VW Lupo

1-17

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1

1

Document info
Document views105
Page views105
Page last viewedTue Dec 06 18:22:10 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments