X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 18 / 34

97 views

0 shares

0 downloads

0 comments

18 / 34

1

Tools for Changing Springs and Shock Absorbers

KL-0025-1 / KL-0021

3 Point Interlock Safety Profile

Mercedes

KL-0025-1

Universal Spring Compressor

(Pat.) (e.g. US-Patent 4 809 951)

As KL-0025-1 K but without plastic case.

For wishbone and multi-link independent suspensions supplied with pairs of pressure plates size 1 and 2.

Fits to Mercedes W116, W123, W124, W126, W129, W140, W170, W171, W201, W202, W208, W210 and W211 front and rear axle.

Ford, GM, Chrysler, VW-type 2 and LT, Fiat, Hummer, Mazda, Toyota,Nissan, Mitsubishi, Renault, Peugeot, Volvo, etc.

Mercedes, Renault, Peugeot

Mercedes, Ford USA

This universal telescopic safety spring compressor with 3-point interlock, anti rotation profile and a new spindle overload protection is unique in its art (German Utility Model). It offers the possibility of a quick and easy removal and installation of coil springs at wishbone and multi-link independent suspensions, without dismantling the axle (exceptions possible). Thus giving simultaneously a high level of safety and a job time saving of between 1 to 2 hours.

Mercedes W124, W201, W202, W210

Ford, GM, Chrysler, Hummer

Mercedes W123, W126, W140

Ford, GM, japanische Pkw

Anti rotation profile

Note: If the spindle is overloaded, the safety pin in the main drive breaks, but the drive mechanism remains active and the compressed spring can be released by the secondary drive. Accidents due to spindle overload are eliminated.

Advantage:

  • The patented 3-point interlock allows compression of the spring only when the piston is correctly locked into the pressure plate. Accidents due to faulty interlock are eliminated.

  • Automated free-wheel at maximum of working travel means that any residual spring pressure cannot be released.

  • All important components, such as pressure plates, piston, tube and housing are fully interlocked with each other. This safety feature eliminates the possibility of the compressed spring unwinding itself.

  • All critical components are drop-forged heat treated.

  • This spring compressor has been tested and approved by the German Workers Safety Insurance (BGS) and by Mercedes.

  • As a result of the telescopic design of the compressor which reduces the length of the tool as the spring is compressed , coil springs can very often be changed without the need to dismantle the suspension. Time saving of between 30 minutes and 2 hours per spring can be achieved.

  • Universal use of the tool due to an extended variety of pressure plates.

Safety Pin (KL-0025-1)

KL-0025-1 K Spring Compressor with case (Pat.)

KL-0025-1 K / KL-0021 K

Secondary drive 10 mm hex (KL-0025-1)

Mercedes

As KL-0025-1

but with Plastic Case.

Specification Part-No.

KL-0025-1 K consists of:

:

Description Spring Compressor with Case

KL-0025-100

Cylinder with Overload Protection System for the Spindle

KL-0025-11

Pressure Plates Size 1

KL-0025-12

Pressure Plates Size 2

KL-0025-1090

Plastic Case

For Technical

Data see page 1-20.

KL-0021 K Spring Compressor with case

(Pat.)

As KL-0025-1

Specification Part-No.

KL-0021 K consists of:

K but without spindle overload protection. :

Description Spring Compressor with Case

KL-0021-100

Cylinder

KL-0025-11

Pair of Pressure Plates Size 1

KL-0025-12

Pair of Pressure Plates Size 2

KL-0025-1090

Plastic Case

For Technical

Data see page 1-20.

1-18

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1

Document info
Document views97
Page views97
Page last viewedSun Dec 04 16:24:53 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments