X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 23 / 34

118 views

0 shares

0 downloads

0 comments

23 / 34

Tools for Changing Springs and Shock Absorbers

KL-0005

KL-0005 Spring Compressor (Pair)

Universal

For use with MacPherson Struts in which Spring Pressure does not exceed 8 000 N.

The spindles are equipped with contra-rotating threads which eliminate the risk of slipping round the spring. (Not suitable for use on Mercedes springs.)

Max. Load: .. 8 000 N Accessories: KL-0005-1

Compression length: ... 65-320 mm Pair of spindles for self-levelling

KL-0006

spring assemblies.

Note: Two part Spring Compressors without safety loop are not authorized in workshops.

KL-0006 Spring Compressor (Pair)

For replacement of self levelling shock absorbers, particularly for rear axles on Mercedes and Ford.

Max. Load: .. 8 000 N Advantages:

Compression length: ... 85-170 mm

KL-..80 includes KL-0008

  • Contra-rotating threads to eliminate slip.

  • Hex drive situated in the centre of the spindle permitting easy use in confined spaces where other spring-compressors cannot be used.

Note: Two part Spring Compressors without safety loop are not authorized in workshops.

Part No.

Description Tool Set

KL-..80 consists of:

KL-0008 KL-0050-1 KL-0050-2 KL-0054 KL-..80-0001

Spring Compressor Universal (Pat.) Box Spanner 29 mm hex, Drive 1/2“ Box Spanner 33.5 mm hex, Drive 1/2“ Tool Set Universal Plastic Storage Case (empty)

KL-0008

Change shock-absorber inserts without strut removal

For nearly every shock absorber insert without dismounting the MacPherson Strut.

KL-..80

Tool Set for the fast shock absorber service (Patented)

KL-0008 Spring Compressor

(Patented)

KL-0008 Safety Spring Compressor which absorber inserts to be exchanged on the veh need to remove the strut from the vehicles.

allows shock- icle, without the

Time savings:.............................................................. Maximum Load:........................................................... Compression Length:.................................................. Spring-Ø:..................................................................... Drive:...........................................................................

...........½ - 2 hours .............. 10 000 N ...........42-210 mm .........110-188 mm ...........hex 24 mm

KL-0008-1

Universal

KL-0008-1

Spring Compressor

(Patented)

As KL-0008 but supplied with a special long impact socket KL-0008-12 which allows operation of the spring compressor by a ½“ impact gun.

KL-0008-12

KL-0008-12 Special Impact Socket hex 24

Special long impact socket with 24 mm and ½“-square dive to operate Spring Compressor KL-0008-1 using an impact gun.

1-23

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1

1

Document info
Document views118
Page views118
Page last viewedSun Dec 11 06:49:10 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments