X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 26 / 34

113 views

0 shares

0 downloads

0 comments

26 / 34

1

KL-0255

setting angle 11° ± 2°

KL-0255-10

KL-0255 with KL-0015

1-26

Tools for Changing Springs and Shock Absorbers

KL-0255 Strut Vise and Adjustment Tool

VW-Audi

(Patented)

For VW-Audi 1990 onwards.

This strut vise and adjustment tool establishes quick, easy and correct adjustment and repairs of struts on the workbench.

Due to the special design strut tubes can be clamped

upper fixing point

vertically and horizontally.

damper

eye

bolts

can

be

clamped

The built in protractor permits exact positioning of the strut base-fixing in relation to the upper locating fixture.

Advantages:

  • 1.

    Strut can be clamped quickly and easily.

  • 2.

    Universal application for all struts

construction.

with

the

same

  • 3.

    Strut tubes can be clamped vertically and damper eye bolts can be clamped horizontally.

  • 4.

    The graduated protractor ensures compatibility with future suspension systems, unlike fixed struts.

  • 5.

    The tool can be mounted on a bench or in a vise.

Note for Audi cars:

Lower shock absorber eye

Suspension legs as fitted to the front and rear axles of Audi 80, Audi 100 from 1992 onwards inclusive Audi A4, A6 and VW Passat from 1996 onwards require installation with a pre- determined offset between the upper and lower fixture points, in order to permit problem-free installation. It is essential to align the upper and lower mounting plates prior to installation of assembled strut. If this prior alignment is not carried out, assembly will only be possible by forcing the mounting holes of the upper and lower plates, and this action of forcing will lead to premature failure of the ride-level control seal, noisy suspension and most often a pull to right or left in the steering which cannot be corrected by steering geometry alignment.

Weight:........... 26 kg

Attention:

VW-Audi

Use only the Spring Compressor protective inserts for VW-Audi.

KL-0015

and

Accessories:

KL-0255-10 - Adjustment plate for Audi A4 (B5 from ‘96 - ‘01), front and rear axle.

Parameters:

Audi 80/90 rear axle ......................................................21° Audi 100 Quattro from ‘91 onwards rear axle ................51° Audi 100 (Front WD) from ‘91 onwards rear axle ..........45° Audi A4 front axle .......................................................... 11° Audi A4 rear axle ...........................................................50° Audi A6 from ‘97 onwards.............................................. 11° VW Passat from ‘96 onwards ........................................ 11°

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1

Document info
Document views113
Page views113
Page last viewedFri Dec 09 00:48:06 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments