X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 31 / 34

117 views

0 shares

0 downloads

0 comments

31 / 34

KL-0104-21

Bolts are easily replaced

Ø 12,5

Fully floating bolts

c.

max. 60 mm

Accessories: KL-0104-2111

KL-0104-20

b.

a.

Ø 10

Tools for Changing Springs and Shock Absorbers

Variably relocatable

KL-0104-21

Spreader tool (univ.) (German Utility Model)

Suitable for strut clamping bores on (for example): VW Golf V, Passat; Audi; BMW; Citroën; Ford; Seat; Škoda; Renault; Peugeot; Japanese vehicles etc.

So that the spring/shock absorber unit can be pulled out of the bore in the steering knuckle even if it is a tight fit, it is essential to open out the clamping bore with spreader tool KL-0104-21. After this, the shock absorber unit can be removed or installed without difficulty, without risk of damaging the (cast iron or aluminium) steering knuckle.

Ø 12,5

Due to the variably relocatable spreading head it is especially suitable for vehicles whose fastening slot is out of centre such as VW-Audi, Ford etc.

End stop

Due to its dimensions and special form the replaceable wedge of the spreading head is particularly suitable for aluminium knuckles. The wedge is provided with an end stop to avoid excessive knuckle widening. Other wedges are available as accessories (e.g. for steel knuckles).

Fully floating bolts avoid the tool canting during knuckle widening.

Technical Data:

(max.): ................................................. 60 mm (widening wedge): a: 5,8 mm; b: 8,5 mm; c: 4,5 mm Mounting hole breadth Widening dimensions

Weight: .................................................................................. 900 g

Accessories: KL-0104-2111 Bolts Ø10 mm

Suitable for M12 tapped holes e.g. for VW T5 (required for knuckle bores with internal thread)

KL-0104-2120 Drive screw with wedge Particularly suitable for steel knuckles.

KL-0104-2120

Technical Data: a. : ...........5,9 mm

b. : ........ 8 mm

c. :........ 7 mm

KL-0104-20

Spreader tool (univ.) (German Utility Model)

Suitable for VW-Audi, BMW, Citroën, Ford, Seat, Škoda, Renault, Peugeot, Japanese vehicles etc.

As KL-0104-20 but with fixed spreading head.

1-31

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1

1

Document info
Document views117
Page views117
Page last viewedSun Dec 11 03:16:41 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments