X hits on this document

PDF document

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1 - page 8 / 34

94 views

0 shares

0 downloads

0 comments

8 / 34

1

Tools for Changing Springs and Shock Absorbers

KL-9002 (Pat.) with stroke 305 mm

KL-9002-100

Size 1 KL-9001-11

KL-9002 and KL-9001 Telescopic Spring Compressor

(Patented, e.g. US-Patent 5 954 314)

H35651

Suitable for vehicles with MacPherson Struts and Semi- Struts, in particular for 4x4 vehicles, Transporters and Vans such as Citroën Jumper; Fiat Ducato; Mercedes Vito, V-Class, M-Class, W210 4Matic; Peugeot Boxer, Break; Renault Master etc.

Size 2 KL-9001-12

KL-9001 (Pat.) with stroke 245 mm

KL-9001-100

Size 1 KL-9001-11

  • If required, additional jaws can be used (see pages 1-10 1-11).

Special jaws allow coil springs to be removed and replaced in wishbone suspensions provided access permits.

Max. Load 27 500 N * For Spring-Ø of 70-210 mm

  • *

    at the official 4-times Safety-Factor, the maximum safe load of both

KL-9002 and KL-9001 is 27,500 N !!

Approved for ½" – impact guns

The only Telescopic Spring Compressor on the market,

Size 2 KL-9001-12

The KL-9002 universal coil spring compressor is recommended to workshops because this tool has an extended travel (stroke) of 305 mm, a maximum distance between jaws of 377 mm and a minimum distance between jaws of 40 mm. In order to repair all types of Strut suspensions, these are the characteristics required by the Spring Compressor.

  • which due to a Raster mounting system offers an adjustable range of jaw openings, from a minimum of 40 mm (KL-9002 / KL-9001) to a maximum of 377 mm (KL-9002) or 349 mm (KL-90021). This is important when compressing very short springs (2-3 coils) and also very long springs which must be fully de-compressed to be replaced. (eg. Audi, BMW, Fiat, Ford, Lancia, Mazda, Mercedes, Renault etc.)

KL-9002 Telescopic Spring Compressor

Part No. KL-9002

Description Telescopic Spring Compressor (with extended stroke)

consists of: KL-9002-100 KL-9001-11 KL-9001-12

Compressor Cylinder Jaws (Pair) Size 1 Jaws (Pair) Size 2

For Technical Data see page 1-09.

KL-9002 SP Telescopic Spring Compressor As KL-9002, but with Jaws including Protective Inserts.

KL-9001

Telescopic Spring Compressor

  • which offers a patented Bayonet Interlock System with automatic self-locking to attach the forged jaws (no tools, bolts or locking rings required).

  • whose spindle drive remains closed in case the locking pin breaks. Due to a secondary drive the spring can be decompressed and removed to install a new locking pin.

  • which offers automatic free-wheel if the spindle reaches the end of operating travel during de-compression – so eliminating the risk of damage to the spring-compressor.

Part No. KL-9001 consists of: KL-9001-100 KL-9001-11 KL-9001-12

Description Telescopic Spring Compressor

Compressor Cylinder Jaws (Pair) Size 1 Jaws (Pair) Size 2

For Technical Data see page 1-09.

KL-9001 SP Telescopic Spring Compressor As KL-9001, but with Jaws including Protective Inserts.

  • which offers automatic free-wheel if the spindle reaches the end of operating travel during de-compression – so eliminating the risk of damage to the spring-compressor.

  • which is suitable for all MacPherson Struts, Semi-Struts and can also be used on many wishbone suspensions as a result of the wide assortment of jaws available.

1-08

Copyright KLANN-Spezial-Werkzeugbau-GmbH 4.E1n

Document info
Document views94
Page views94
Page last viewedSun Dec 04 08:43:09 UTC 2016
Pages34
Paragraphs2221
Words10996

Comments