Setting Up Dial via Office Features
Obtain the device COP file.
a. Navigate to the software download site: http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=281001428.
Locate the cmterm-nokia_s60_8.5v06-sccp.cop.sgn file.
Click Download Now.
Note the MD5 checksum. You need this information later.
Click Proceed with Download and follow the instructions.
Place this COP file on an FTP or SFTP server that is reachable from your Cisco Unified Communications Manager servers.
Install this COP file on the Publisher server in your Cisco Unified Communications Manager cluster:
a. Choose Cisco Unified OS Administration from the Navigation list box in the top-right corner of the Cisco Unified Communications Manager Administration portal, and then click Go.
Choose Software Upgrades > Install/Upgrade.
Specify the location of the COP file and provide the required information.
For more information, see the online help.
Choose the device COP file.
Follow the instructions on the screen.
Wait until the process is complete. This process may take some time.
To ensure system runs smoothly, wait for the process to complete and then reboot the system before using it.
Reboot Cisco Unified Communications Manager.
Do not add any Nokia S60 devices until after the Cisco Unified Communications Manager reboots.
k. Let the system fully return to service.
Install the COP file on each Subscriber server in the cluster, using the same process you used for the Publisher server, including rebooting the server.
To avoid interruptions in service, ensure that each server has returned to active service before you perform this procedure on another server.
Administration Guide for Cisco Mobile for Nokia, Release 8.5