X hits on this document

21 views

0 shares

0 downloads

0 comments

3 / 8

Scion tC Figure Grille Installation

1) REMOVE OEM GRILLES

1.1) hood.

Remove the OEM top grille. Begin by popping the The top grille is held in place by a series of Philips

head screws and tabs, as shown in Fig. 1. the screws from the perimeter of the grille.

First remove all Once screws are

removed, only the tabs are holding the grille in place. Using a slotted screw driver, press down on the tabs, and then press in on that portion of the grille. Go around the perimeter of the grille and free all tabs. When the upper grille is loose, you will be able to turn it and remove it through the front.

Remove all Philip head screws first

Free the tabs next using a slotted screw driver while pressing in on the grille

Figure 1. A series of Philips head screws and tabs hold the OEM top

grille in place.

1.2.)

Remove the OEM lower grille. If the lower grille has

fog lights, begin by disconnecting the plugs to the lights. 4

Document info
Document views21
Page views21
Page last viewedFri Oct 28 08:46:50 UTC 2016
Pages8
Paragraphs58
Words1057

Comments