X hits on this document

PDF document

Material Safety Data Sheet - page 1 / 4

14 views

0 shares

0 downloads

0 comments

1 / 4

Material Safety Data Sheet

SuperSeal®

MSDS No. 845

Date of Preparation: January 15, 2013

Revision: 0006

Section 1 - Chemical Product and Company Identification

Product/Chemical Name: SuperSeal® General Use: Release Agent Manufacturer: Smooth-On Inc., 2000 St. John St., Easton PA 18042

Phone (610) 252-5800, FAX (610) 252-6200 Emergency Contact: Chem-Tel

Domestic 800-255-3924 International 813-248-0585

Section 2 - Hazards Identification

Hazard Designation:

Europe

Canada

HMIS

H

2

F

3

R

0

Xn: Harmful F: Highly Flammable

Risk phrases pertaining to particular dangers R11: Highly flammable. R36: Irritating to the eyes. R38: Irritating skin. R65: Harmful: may cause lung damage if swallowed. R67: Vapors may cause drowsiness and dizziness.

Classified according to Articles 6 & 7of Directive 1999/45/EC Section 3 - Composition / Information on Ingredients

Alkanes, C7-C10-Iso CAS Number: 90622-56-3 EINECS Number: 292-458-5

None

None

Established

Established

Component

ACGIH TWA

OSHA PEL

400 ppm

Propan-2-ol CAS Number: 67-63-0 EINECS Number: 200-661-7

200 ppm

Hazard

Designation

Xn

F

Xn

F

Weight Percent

(%) 70-90%

5-15%

Section 4 - First Aid Measures

Inhalation: Remove source(s) of contamination and move victim to fresh air. If breathing has stopped, give artificial respiration, then oxygen if needed. Contact physician immediately. Eye Contact: Flush eyes with plenty of water. If irritation persists, seek medical attention. Skin Contact: In case of skin contact, wash thoroughly with soap and water. Ingestion: Ingestion is unlikely route of exposure. Do not induce vomiting unless instructed by a physician. After first aid, get appropriate in-plant, paramedic, or community medical support.

Document info
Document views14
Page views14
Page last viewedFri Dec 09 06:03:54 UTC 2016
Pages4
Paragraphs109
Words1415

Comments