X hits on this document

71 views

0 shares

0 downloads

0 comments

4 / 27

  • 1.

    Headlight bulb holder

    • 3.

      Unhook the headlight bulb holder, and then remove the defective bulb.

EW000119

WARNING Headlight bulbs get very hot. There- fore, keep flammable products away from a lit headlight bulb, and do not touch the bulb until it has cooled down.

4. Place a new bulb into position, and then secure it with the bulb holder.

PERIODIC MAINTENANCE AND MINOR REPAIR

EC000104

CAUTION:

Take care not to damage the follow- ing parts: Headlight bulb Do not touch the glass part of the headlight bulb to keep it free from oil, otherwise the transpar- ency of the glass, the luminosi- ty of the bulb, and the bulb life will be adversely affected. Thor- oughly clean off any dirt and fin- gerprints on the headlight bulb using a cloth moistened with al- cohol or thinner. Headlight lens

    • Do not affix any type of tinted film or stickers to the head- light lens.

    • Do not use a headlight bulb of a wattage higher than speci- fied.

  • 5.

    Install the bulb cover, and then connect the coupler.

  • 6.

    Install the panel.

  • 7.

    Have a Yamaha dealer adjust the headlight beam if necessary.

6-32

1. Socket

EAU04000

Replacing a tail/brake light bulb

  • 1.

    Remove the passenger seat. (See page 3-10 for passenger seat re- moval and installation procedures.)

  • 2.

    Remove the socket (together with the bulb) by turning it counter- clockwise.

  • 3.

    Remove the defective bulb by turning it counterclockwise.

  • 4.

    Insert a new bulb into the socket, and then turn it clockwise until it stops.

  • 5.

    Install the socket (together with the bulb) by turning it clockwise.

  • 6.

    Install the passenger seat.

6

Document info
Document views71
Page views71
Page last viewedWed Dec 07 00:25:56 UTC 2016
Pages27
Paragraphs558
Words4432

Comments