PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a turn signal light bulb
Remove the turn signal light lens by removing the screw.
Remove the defective bulb by pushing it in and turning it counter- clockwise.
Insert a new bulb into the socket, push it in, and then turn it clock- wise until it stops.
Install the lens by installing the screw.
Do not overtighten the screw, other- wise the lens may break.
Troubleshooting Although Yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur dur- ing operation. Any problem in the fuel, compression, or ignition systems, for example, can cause poor starting and loss of power. The following troubleshooting charts represent quick and easy procedures for checking these vital systems your- self. However, should your motorcycle require any repair, take it to a Yamaha dealer, whose skilled technicians have the necessary tools, experience, and know-how to service the motorcycle properly. Use only genuine Yamaha replace- ment parts. Imitation parts may look like Yamaha parts, but they are often inferior, have a shorter service life and can lead to expensive repair bills.