X hits on this document

27 views

0 shares

0 downloads

0 comments

10 / 12

10

HeartStart MRx Monitor/Defibrillator

Product Specifications

Physical Dimensions

Without external paddles: 1. in. (W) x .3 in. (D) x 11. in. (H) (313 mm x 10 mm x 95 mm) With external paddles: 13. in. (W) x .3 in. (D) x 13. in. (H) (30 mm x 10 mm x 35 mm)

Weight

13. lbs. ( kg): base unit with 1 battery, pads and pads cable. Carrying case adds .1 lbs. (1. kg). Paddle tray and external standard paddles add less than .5 lbs. (1.1 kg).

Environmental and Physical Requirements

Water Resistance Solids Resistance Temperature

Meets IEC 001-- IPX Operating: 3º - 113º F (0º - 5º C)

Humidity Safety

Storage: -º - 15º F (-0º - 0º C) Operating: 0% to 95% relative

Meets EN 001-1, UL 01-1, CSA C. No. 01-1-M90 CSA, EN 001--

Display Dimensions Type Resolution Wave Viewing Time Defibrillator Defibrillator Model Waveform

  • .’’ diagonal (1 mm x 11 mm)

TFT color LCD

  • 

    0 x 0 pixels (VGA)

5 seconds (ECG)

HeartStart MRx (M3535A)

Truncated Exponential Biphasic. Waveform parameters adjusted as a function of patient impedance.

Output Energy

Manual (selected): 1-10, 15, 0, 30, 50, 0, 100, 10, 150, 10, 00 Joules maximum energy, limited to 50 Joules for internal defibrillation. AED Mode (single energy output): 150 Joules into a 50 ohm load.

Charge Time

Less than 5 seconds to 00 Joules with a new, fully charged lithium ion battery at 5º C

Shock Delivery Quick Shock

Via multifunction defib electrode pads or paddles

Less than 10 seconds from cessation of CPR to shock delivery

Patient Impedance Range

Minimum: 15 Ohm (internal defibrillation); 5 Ohm (external defibrillation) Maximum: 10 Ohm

AED Mode

Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines

Strip Chart Printer

Printer

Standard: 50 mm (paper width) thermal array printer Optional: 5 mm (paper width) thermal array printer

Continuous ECG Strip

Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay

Auto Printing

Printer can be configured to print marked events, charge, shock and alarms

Reports

Event Summary, 1-lead, Vital Signs Trending, Operational Check, Configuration, Status Log, and Device Information

Paper Size

1.9 in. (50 mm) W by 100 ft. (30 m) L .95 in. (5 mm) W by 100 ft. (30 m) L

Document info
Document views27
Page views27
Page last viewedSat Dec 10 15:21:10 UTC 2016
Pages12
Paragraphs303
Words3492

Comments