X hits on this document

12 views

0 shares

0 downloads

0 comments

2 / 6

New and Changed Information

New and Changed Information

The following features are new or have changed for Cisco ITU Integrated SS7 TCAP system software, hardware, or firmware.

  • Compatibility with ITU Integrated SS7 ISUP, V5.1(2), system software

Compatibility with ITU Integrated SS7 ISUP, V5.1, system software

Cisco ITU Integrated SS7 TCAP system software is now compatible with ITU Integrated SS7 ISUP, V5.1(2), system software.

Refer to the ITU Integrated SS7, V5.1, System Supplement for detailed information on the TCAP software.

System Requirements

This section provides a list of system requirements for running ITU Integrated SS7 TCAP system software. These requirements are categorized by hardware, firmware, and software. Contact Cisco Systems TAC (Technical Assistance Center) for any site-specific information.

Hardware Requirements

In addition to the Integrated SS7 system software, ITU TCAP Version 5.1 requires the following hardware:

  • One of the following systems:

    • VCO/80

    • VCO/20 with an SS7 VME shelf

    • VCO/4K with an SS7 VME shelf

  • A SPARC CPU5V card

  • 32 MB RAM (2K Mode) or 64 MB RAM (4K Mode and/or Multi-SP Mode) available on the system

Firmware Requirements

There are no special firmware requirements for TCAP V5.1. However, the firmware in the VCO must have the appropriate revision level required by the Generic software. For information, refer to the VCO/4K Generic Release Notes.

Cisco ITU Integrated SS7 TCAP, V5.1, Release Notes

2

78-10883-01

Document info
Document views12
Page views12
Page last viewedSun Dec 04 10:28:37 UTC 2016
Pages6
Paragraphs166
Words1490

Comments