X hits on this document

75 views

0 shares

0 downloads

0 comments

1 / 1

Dia 2

Auger Tube Cutting Instructions

Starting from the end of the auger tube ( Dia. 1) mesure 12" back. Cut 2/3 of the top of the tube away it should look like (dia. 2.) Than you slip the auger tube into the boot and drill 2 --5/16" holes through the tube and boot about 8" apart and bolt the tube to the boot using 1/4" X 1" Carrage bolts. The Nylon bushing is used at the tail of the auger to help hold it. You want to mount the nylon bushing so there is about 1/4" clearence under the auger.

12"

Auger Tube

8"

Dia. 1

Document info
Document views75
Page views75
Page last viewedFri Dec 02 02:17:54 UTC 2016
Pages1
Paragraphs7
Words107

Comments