X hits on this document

93 views

0 shares

0 downloads

0 comments

17 / 35

Test Tools and Kits

32

JackRapidTermination Tool

The JackRapid termination tool is the industry’s most innovative and time-saving installation tool. JackRapid allows you to terminate jacks eight times faster than traditional impact tools—with accuracy that’s unmatched. The patented jack termination tool seats and terminates all wires simultaneously with one squeeze of an ergonomic handle. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step. Simple, one-handed operation reduces hand fatigue. With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

  • Cuts installation time—easy-to-use handle, seats and cuts all wires at once, saving you up to two

minutes installation time per jack

  • High-quality, consistent terminations—no more compromised connections and wasted jacks

  • Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue

Model JR-LEV-1 JR-LEV-1-H JR-SYS-UNI-1 JR-SYS-UNI-1-H JR-LEV-2 JR-LEV-2-H JR-SYS-2 JR-SYS-2-H JR-ORT-2 JR-ORT-2-H JR-ADC-2 JR-ADC-2-H JR-ERGOHANDLE JR-PAN-2 JR-PAN-2-H

Description JackRapid termination tool (for Leviton 41106, 41108, 5G108) JackRapid replacement blade head (for Leviton 41106, 41108, 5G108) JackRapid termination tool (for Systimax MPS100E, C5,M1BH and Uniprise UNJ600/500/300) JackRapid replacement blade head (for Systimax MPS100E, C5, M1BH and Uniprise UNJ600/500/300) JackRapid termination tool (for Leviton 61110, 5G110, 6110G) JackRapid replacement blade head (for Leviton 61110, 5G110, 6110G) JackRapid termination tool (for Systimax MGS400, MGS500, MFP420, MFP520) JackRapid replacement blade head (for Systimax MGS400,MGS500, MFP420, MFP520) JackRapid termination tool (for Ortronics TJ5E00, TJ600, TJ610) JackRapid replacement blade head (for Ortronics TJ5E00,TJ600, TJ610) JackRapid termination tool (for ADC KM8, Copper Ten®) JackRapid replacement blade head (for ADC KM8, Copper Ten) JackRapid ergonomic handle JackRapid termination tool (for Panduit NK688M) JackRapid replacement blade head (for Panduit NK688M)

To learn more visit:

www.flukenetworks.com/jackrapid

Get accurate termi

nations and clean, consistent cuts every time with the JackRapid Termination Tool.

1. Strip cable jacket with a standard cable stripper or the built-in cable stripper.

2. Determine wiring scheme. Dress all four pairs (eight wires).

3. Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.

4. Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.

5. Pull trigger completely and remove excess wire prior to releasing trigger.

6. Wires will be seated and cut for a solid termination.

www.flukenetworks.com/telecom

D914S Impact Tool

SoftTouch D914S Impact Tool offers a new ergonomic design with a soft rubber handle for better grip and rounded edges to absorb more of the impact recoil. Includes built-in probe pic/spudger and torque, allowing you to choose from high-and low-impact settings.

  • Industry standard, internationally accepted with lifetime warranty

  • Hook and spudger tools are built into the handle

  • Automatic spring handle—choose low impact for 24/26 gauge wire or high impact for 22-gauge wire

  • Accepts Phillips-head or flat screwdriver blade

To learn more visit: www.flukenetworks.com/d914

D914Impact Tool

The D914 Impact Tool is the only punchdown tool to combine torque and impact. It combines two versatile tools, the hook and spudger, into the handle. 66/110 blades available.

  • Ensures clean, smooth terminations ready for optical transmission

  • Industry standard, internationally accepted with lifetime warranty

  • Hook and spudger tools are built into the handle

  • Automatic spring handle—choose low impact for 24/26 gauge wire or high impact for 22-gauge wire

  • Accept Phillips-head or flat screwdriver blade

To learn more visit: www.flukenetworks.com/d914

Model 10061000 10061100 10061110

Description D914S Impact Tool Tool with EverSharp 66 blade Tool with EverSharp 110 blade

10061501

Tool with EverSharp 110, EverSharp 66 blade and free screwdriver blade

10061503

Tool with BIX and EverSharp 66/110 cut blade

10061810

Tool with EverSharp 66/110 blade

Model 10051000 10051100 10051110

Description D914 Impact Tool Tool with EverSharp 66 blade Tool with EverSharp 110 blade

10051120

Tool with EverSharp 110 and EverSharp 66 blade

10051501

Tool with EverSharp 110, EverSharp 66 blade and free screwdriver blade

Test Tools and Kits

Model 10054000 10055000 10055110

Description D814 Impact Tool Tool with EverSharp 66 blade Tool with EverSharp 110 blade

10055200

Tool with EverSharp 110 and EverSharp 66 blade

10055501

Tool with EverSharp 110, EverSharp 66 blade and free Wood Screw Starter Punch blade

10055503

Tool with BIX and Eversharp 66/110 cut blade

D814Impact Tool

The D814 Impact Tool is a deluxe, all-in-one, telecom punchdown tool and comes with the 66/110 blade. Impact wheel has high and low settings. Automatic spring mechanism provides the right impact to seat and/or terminate wires.

  • Industry standard with lifetime warranty

  • Accepts standard industry blades

  • Lightweight and easy-to-use

  • Adjustable spring impact mechanism allows low impact for

24/26 gauge wire or high impact for 22-gauge wire To learn more visit: www.flukenetworks.com/d814

D-Impactor5-Pair Impact Tool

Model

Description

The D-Impactor 5-pair impact tool easily cuts and terminates five copper pairs on a 110 block. This rugged, easy-to-use tool saves time and minimizes hand stress. The patented individually molded blades eliminate the chance of metallic shorts ensuring optimal performance of your network. Lifetime warranty.

10059000

D-Impactor (five-pair 110 impact tool)

10059030

D-Impactor replacement blade

  • Single reversible blade part

  • Ease of use and reversing of cutting blade

  • Fewer moving parts allow for smoother push down, less hand stress

To learn more visit: www.flukenetworks.com/dimpactor

1-800-283-5853 (US and Canada) • www.flukenetworks.com

33

Document info
Document views93
Page views93
Page last viewedSat Dec 10 02:26:55 UTC 2016
Pages35
Paragraphs2776
Words20939

Comments