X hits on this document

Word document

Computer Information Systems Program - page 23 / 24

67 views

0 shares

0 downloads

0 comments

23 / 24

6. Specific Requirements of Ambulatory Medical System

6.1 Functional Requirements of Ambulatory MedicalSystem

(Note. Asked source about blood type, allergies, etc. informed that information presently not relevant to EMT. [1])

6.3.1 The software to be developed shall accept output from existing patient monitoring equipment.

6.3.2 The software to be developed shall display graphical and numeric data at a remote location in real time.

6.3.3 The software to be developed shall graphically display output from an EKG oscilloscope monitor.

6.3.4 The software to be developed shall display numeric output from an EKG monitor.

6.3.5 The software to be developed shall display numeric percentages from a pulse oximeter.

6.3.6 The software to be developed shall display numeric values for systolic blood pressure.

6.3.7 The software to be developed shall display numeric values for diastolic blood pressure.

6.3.8 The software to be developed shall display numeric values for mean blood pressure.

6.3.9 The software to be developed shall display text values for patient identification.

6.2 Non- Functional Requirements of Ambulatory Medical System

6.4.1 The software to be developed must display correct numeric pulse oximeter values at a remote location within five seconds. (Note. Correct values within 3% of actual [1])

6.4.2 The software to be developed must display correct numeric EKG values at a remote location within five seconds.

Document info
Document views67
Page views67
Page last viewedFri Dec 09 10:05:28 UTC 2016
Pages24
Paragraphs257
Words3786

Comments