Setting the Day
When adjusting the day, the “D” will be shown. Press the 'Menu
to adjust the day. Press the 'Confirm' button
after which you would be able to adjust the and proceed to setting the time.
Setting the Time
When adjusting the hour, the “H” will be shown. Press the 'Menu
to adjust the hour. Press the 'Confirm' button
the hour, after which you would be able to adjust the and proceed to setting
When adjusting the minute, the “M” will be shown. Press the 'Menu
to adjust the minute. Press the 'Confirm' button
the time and exit this mode.
SD Memory Card In this unit, you can use SD Memory Cards of up to 4GB
To use an SD memory card, turn off the ATC3K and insert the SD memory card. When the camera is turned on again the SD card icon will be displayed on the LCD screen. The remaining time on the SD card will also be displayed on the LCD screen. All of the video footage will now be saved onto the SD card.
If there is an error on the SD memory card, the SD card icon and the letters 'Err' will be displayed on the LCD screen. In this case, turn off the camera and remove the SD card.
The SD card is equipped with a Write-Protect switch that can prevent writing and formatting to the card. The letters 'Err' will be displayed if the SD card is locked with Write-Protect switch.
We recommend using SanDisk regular or AData SD cards.
With use on Windows 2000 users must format to FAT otherwise the SD card and camera may malfunction
Available Recording Time
The available recording time is an approximation (these vary depending on the recording conditions and the type of card).
Picture quality setting
VGA 30 fps
QVGA 30 fps
1 min 36 s