X hits on this document

54 views

0 shares

0 downloads

0 comments

21 / 23

  • XI)

    Webcam USB mode

    • 1.

      To use the Webcam function, whilst the mode is in F, press 'Menu'

. This will

change the mode to C. Press 'Confirm' will recognize the camera as a webcam.

to select. Once selected the computer

2. While in either mode, to change to the other, users must disconnect from their PC and reconnect going through the entire selection procedure again. 3. The camera will use power from the computer.

Note:

  • 1.

    Videos will be saved in AVI format.

  • 2.

    When the ATC3K is connected to the PC with an SD card inserted in the camera,

the '100ATC3K' folder will show the files on the SD card. 3. Webcam mode is not available with Apple Mac.

You can upload your recorded video footage to a MAC by connecting the ATC3K to your MAC using the USB cable.

  • 1.

    Turn the ATC3K on.

  • 2.

    Connect the ATC3K to a MAC via the USB cable.

  • 3.

    There are 2 modes available, File (F) and Cam (C). File allows you to check the files in the camera or SD card. Cam is the webcam function.

  • 4.

    “F” appears on the ATC3K LCD screen, which means ATC3K is connected to your MAC and files are available for review.

  • 5.

    To choose to review Files in the Camera/SD card the user should press 'Confirm' Once selected the ATC3K drive appears in the [My Computer] folder. *If you are connecting the camera to a MAC for the first time, the required driver is installed automatically.

37

  • 6.

    Open the '100ATC3K' folder in the [DCIM] folder to start selecting your desired video files. Copy the desired video to your MAC.

  • 7.

    While in either mode, to change to the other, users must disconnect from their MAC and reconnect going through the entire selection procedure again.

  • 8.

    The camera will use power from the computer.

Note: The webcam comes with a webcam stand. Please use this when using your ATC3K as a webcam.

XII) Playing back video footage on a TV

  • 1.

    Turn the ATC3K and TV off.

  • 2.

    Connect your ATC3K to your TV using the AV cable.

  • 3.

    Turn the TV and ATC3K on.

  • 4.

    There are 2 modes available, Playback (PB) and Viewfinder (VF).

  • 5.

    "PB" appears on the LCD screen as default. To change to VF press the 'Menu' button

then 'Confirm'

. Once this mode is selected, a real time image will appear on your TV

screen (or PMP). When in VF mode all record functions are disabled. TV mode is automatically activated when the AV cable is connected to the ATC3K and TV.

6. If PB mode is selected the function keys will be shown on the TV screen. The function

keys include Pause

, Stop

, Scan Back

, Play

,Scan Forward

and Delete

One

.

38

Document info
Document views54
Page views54
Page last viewedSun Dec 04 04:00:00 UTC 2016
Pages23
Paragraphs736
Words8761

Comments