X hits on this document

147 views

0 shares

0 downloads

0 comments

21 / 57

Randolph County                                                                                                                     Bid 07-1001

Due Date:  Thursday, October 25, 2007, 3:00P.M.                                                         EMS Ambulances

_____________________________________________________________________________________

5.7

    Printed Circuit Board:

The printed circuit board shall be designed and manufactured as follows: A screen printed board with all circuits fully numbered and labeled. The circuit board shall be a double-sided copper trace printed circuit board with a double-sided laminated isolator. The board shall be non-photo-imaginable solder mask over bare copper with hot air leveled solder over non-masked copper. The board traces shall be three ounce copper panel.  Fuse capacity is the beginning factor in calculating trace width to ensure proper current carrying capability.  The circuits shall then be oversized as much as space permits for maximum cooling of the board. All holes shall be plated through. The terminal strips shall be mounted on the board for connection of above mentioned wiring harnesses. LED diagnostic shall be included.

Does your bid comply with this requirement?Yes   _____   No   _____

5.7.1The printed circuit board shall incorporate visual onboard diagnostics for input, output, and switching circuits for troubleshooting at a glance.

Does your bid comply with this requirement?Yes   _____   No   _____

5.8

     Circuit Board Certification:

            The printed circuit board shall meet NEMA GRADE FR-4, UL-94-V-0, and

            MIL-P-12949F/4B specifications.

Does your bid comply with this requirement?Yes   _____   No   _____

5.9

    Electrical Generating System:

The ambulance shall be equipped with the OEM supplied dual alternators.

Does your bid comply with this requirement?Yes   _____   No   _____

5.10    Engine Automatic High-Idle Speed Control:  

           Automatic Engine shall be OEM supplied High-Idle Speed Control via parking brake..  

Does your bid comply with this requirement?Yes   _____   No   _____

5.12

   Voltmeter or Voltage Monitor:

It shall be a OEM digital voltmeter.

Does your bid comply with this requirement?Yes   _____   No   _____

Page 21 of 56

Document info
Document views147
Page views147
Page last viewedSun Dec 04 19:16:00 UTC 2016
Pages57
Paragraphs1140
Words17169

Comments