X hits on this document

3 views

0 shares

0 downloads

0 comments

1 / 1

Philip Doyle Industrial Duty Condensate Evaporator

Unit Specification Data Sheet

95 Covington Street, Hamilton, ON, L8E 2Y4 Phone 905-561-0545 Fax 905-561-5858 Email: info@philipdoyle.com

Condensate Evaporator Unit Specification Data

Physical

Outer Enclosure Dimensions: 1’-10” x 2’-0” x 1’-4” high

Inner Tank Dimensions:

1’-6” x 1’-8” x 1’-1” high

Construction

Outer Enclosure: Inner Tank:

304/316 Stainless Steel Cast Aluminum

Tank Capacity

3 US Gallons per hour total, 25 lb/hr, 2.5 cubic feet approximately

Primary tank section: Secondary tank section:

    • 1.5

      US GPH, 12.5 lb/hr, 1.25 cubic feet

    • 1.5

      US GPH, 12.5 lb/hr, 1.25 cubic feet

(Optional)

Electrical

Primary Tank Heaters: Secondary Tank Heaters: Control:

Power Supply 50 or 60 Hz: Control Voltage: Option:

Qty 3 x 2 kW Cartridge heater =6 kW Optional Qty 1 Thermo switches re: Hi-limit, Capacitance level sensor 3 Ph, 240, 400, 460, 575,690Volt 115V/1/60 or 50 Hz Units also available for 240Volt DC applications

Electrical Panel

The Heating Contactors (Qty 1), Fuses & Fuse blocks and electrical wiring are part of the electrical panel and normally supplied as part of the A/C unit. An extra price is applicable if the panel is required as a standalone item without an A/C system.

Document info
Document views3
Page views3
Page last viewedThu Dec 22 22:44:53 UTC 2016
Pages1
Paragraphs25
Words194

Comments