X hits on this document

53 views

0 shares

0 downloads

0 comments

19 / 21

9 When you reach the end of the hanger, pull the wire tightly through a couple of wire wraps just before the end, and snip the wire to leave about 1" (3cm).Then, coil the end as you did when you began, creating a sort of knot.Trim off the excess coil piece to be just a little bit shorter than the hanger.

11

Choose five objects to hang from the hanger, and set each one in a vise to drill.You may want to protect the object by putting it in a towel before clamping the vise down.

10

12

1

Use a retractable pencil to add teal paint dots along the top of the hanger, along the sides and just above the drilled holes.

Use 19-gauge wire to hang the objects.You may need to experiment with the wrapping to find the best solution for each item. I used a trapeze-like system for the dice and a coil wrap for the doll arm.To make a photo holder, cut a 24" (61cm) length of baling wire and wrap one end around the ¾" (19mm) dowel about three and a half times. Bend the remaining wire straight.

CreateMixedMedia.com

Document info
Document views53
Page views53
Page last viewedMon Dec 05 05:11:56 UTC 2016
Pages21
Paragraphs250
Words3199

Comments