X hits on this document

61 views

0 shares

0 downloads

0 comments

9 / 21

1

4

Working from the spool, form a large heart shape from 16-gauge wire, starting and ending at the bottom of the heart. Cut the wire, leaving a small amount of excess.

2

To keep the shape of your heart, secure it at the bottom by twist- ing the cut ends together with needle-nose pliers. Bend them under to secur

3

Working from the spool, loosely wrap and weave the wire around the heart shape until it starts to take on a 3-D form. Cut the wire, leaving 12" (30.5cm) excess to weave through the heart. Feel free to wrap and weave as much as you want.

I think the scribble heart looks better when it’s a little squished. Set the heart on a hard surface and push against it with the palm of your hand to flatten it slightly.

5

Form a pair of wings from 16-gauge wire by forming 1 wing, wrapping the wire at the center and then forming the second wing. Cut the wire from the spool, leaving some excess for fastening it to the heart.

  • CreateMixedMedia.com

Document info
Document views61
Page views61
Page last viewedFri Dec 09 19:23:13 UTC 2016
Pages21
Paragraphs250
Words3199

Comments