X hits on this document

5 views

0 shares

0 downloads

0 comments

2 / 2

2. A new screen will open. Fill out the required information.

    • In the “Your Name” field, enter the name of the proctor.

    • In the “School Name” field, enter the name of the school.

    • In the “Lab Name/ Room Number” field, enter room number or enter 1.

    • In the “Station Number” field, enter computer number. (You may want to number the computers that the students will be using for testing.)

    • Click on “Run System Check.”

  • 3.

    Once the system check is complete, you should see a green check mark informing you that

the system check is complete and that your computer meets the requirements.

If you do not see the green check mark, review the messages you are receiving to see if you can fix the problem on your own. If you cannot fix the error, please contact Pearson Tech Support at 1-800-514-8494.

Document info
Document views5
Page views5
Page last viewedWed Dec 07 11:17:34 UTC 2016
Pages2
Paragraphs18
Words171

Comments