X hits on this document

33 views

0 shares

0 downloads

0 comments

2 / 12

SECTION I

INTRODUCTION

1-1. Scope

Code

Explanation

This manual lists repair parts and special tools re- quired for the performance of organizational main- tenance of the TV-2/U, TV-2A/U, TV-2B/U, and

TV-2C/U. The PCCN GTEABO for all models.

for

the

equipment

is

1-2. General This repair parts and special

tools list is divided

into the following sections:

PD—Support item, excluding support equipment, procured for initial issue or outfitting and stocked only for subsequent or additional initial issues or outfittings. Not subject to automatic replenishment. PE—Support equipment procured initial issue or outfitting to nance repair activities. PF—Support equipment which will not be stocked but which will be centrally procured on de- and stocked for specified mainte-

  • a.

    Prescribed Load Allowance

    • II.

      N o t a p p l i c a b l e .

(PLA)—Section

mand. PG—Item procured and

stocked to provide for

b . R e p a i r P a r t s L i s t — S e c t i o n I I I . A list of repair parts authorized for the performance of mainte- nance at the organizational level. This repair parts list is arranged in alphabetical order.

sustained support for the life of the equip- ment. It is applied to an item peculiar to the equipment which because of probable dis- continuance or shutdown of production fa-

c. Special Tools, Test and Support Equipment—

Section IV. Not applicable. d. Index—Federal Stock Number

and Reference

Number Cross-Reference to Figure and Item Num- ber—Section V. A list, in ascending numerical se- quence, of all Federal stock numbers appearing in the listings, followed by a list, in alphameric se-

quence, of all reference numbers appearing in the listings. Federal stock number and reference num- bers are cross-referenced to each illustration figure and item number or reference designation appear- ance.

1-3. Explanation of Columns

The following provides an explanation of columns in the tabular lists—

a. S o u r c e , (SMR).

Maintenance,

and Recoverability

Codes

(1) Source code. quiring support items overhaul of end items.

Indicates the manner of ac- for maintenance, repair, or Source codes are—

Code

Explanation

PA—Item procured and stocked for anticipated or known usage.

PB—Item procured and stocked for insurance pur- poses because essentiality dictates that a min- imum quantity be available in the supply

systems. PC—Item procured

and

stocked

and

which

other-

wise would be coded PA except that it is de- teriorative in nature.

cilities would prove duce at a later time.

uneconomical

to

repro-

KD—An item of depot overhaul/repair kit and not purchased separately. Depot kit defined as a kit that provides items required at the time of overhaul or repair. KF—An item of a maintenance kit and not pur- chased separately. Maintenance kit defined as a kit that provides an item that can be re- placed at organizational or direct support or general support levels of maintenance. KB—Item included in both a depot overhaul/repair kit and a maintenance kit. MO—Item to be manufactured or fabricated at or- ganizational level. MF—Item to be manufactured or fabricated at di- rect support maintenance level. MH—Item to be manufactured or fabricated at gen- eral support maintenance level. MD—Item to be manufactured or fabricated at de- pot maintenance level. AO—Item to be assembled at organizational level. AF—Item to be assembled at direct support main- tenance level. AH—Item to be assembled at general support main- tenance level. AD—Item to be assembled at depot maintenance level. XA—Item is not procured or stocked because the requirements for the item will result in the replacement of the next higher assembly. XB—Item is not procured or stocked. If not avail- able through salvage, requisition.

2

Document info
Document views33
Page views33
Page last viewedSat Dec 10 14:08:26 UTC 2016
Pages12
Paragraphs654
Words3560

Comments