X hits on this document

20 views

0 shares

0 downloads

0 comments

3 / 8

AXA2R

DIMENSIONS (Unit: mm)

The CAD data of the products with a

CAD Data

mark can be downloaded from: http://panasonic-electric-works.net/ac

1. On board mounting standard type (Without standoff) Part No. AXA2R73061(With card jump-out prevention function) AXA2R73021(Without card jump-out prevention function) *1 0.08 (Standoff dimensions) (Signal/Detection contact) 0.10 Terminal coplanarity

2.70

1.40

0.60

0.625

19.15 17.50

9.375 2.50

Circuit schematic

No. 3

CAD Data

28.40

Card center

(29.80)

No. 2

5.3

1.2

0.70

18.20

9.40 8.10

No. 1

13.50

(14.65)

(3.40)

28.15

(2.10)

1.65±0.1

(17.50) (Contact pitch) 2.50±0.1

SD memory card

(0.625)

14.55

27.95

Detailed internal view

View of set card

Recommended PC board pattern (TOP VIEW)

3

2

Pin No.8 Pin No.7

Pin No.6 Pin No.5 Pin No.4 Pin No.3 Pin No.2 Pin No.1 Pin No.9

(0.80) (Push stroke) (6.00) (Eject stroke) (35.10) (Set condition)

10.40±0.05 8.10±0.05

1.60±0.05

(30.15)

    • 19.15

      ±0.05

    • 17.50

      ±0.05

    • 0.625

      ±0.05

1.00±0.05

(15.65)

10.37

7 48 1 60

2.50±0.05 (Pitch)

: Pattern insulation is recommended. (Whole area)

: Pattern forbidden area*2

1

(24.00)

SD memory card

(R)

30.30±0.05 18.20±0.05

2.10

9.40±0.05 8.10±0.05

1.20±0.05

0.50±0.05 1.10±0.05 0.50±0.05 1.10±0.05

1.60

(0.50) 5.30±0.05

1.40±0.05 1.60±0.05 3.30

(R)

0.60±0.05

0.40±0.05

Substrate edge

1.60±0.05

14.55±0.05

PC board both side

Socket edge

27.95±0.05

Through hole

1.75±0.05

12.25±0.05

1.55±0.05

12.45±0.05

    • 1.60

      ±0.05

    • 0.60

      ±0.05

    • 0.40

      ±0.05

8.58

Write protect switch

Card detection

Write unable

Write enable

switch

Open

Open

Open

Open

Closed

Closed

Contact status of the card detection and write protect switches

13

Card attachment condition

Card not attached Card attached

Terminal number

12

*1 Standoff dimension is the dimension that takes into account the solder resist or silk screen printing thickness on the PC board in order to preserve the dimension from the surface of the PC board to the bottom of the socket. *2 This is the pattern forbidden area. It is provided to prevent the signal contact tips from contacting the substrate surface.

Recommended metal mask pattern Metal mask thickness: 120µm

    • 2.5

      ±0.05 (pitch)

    • 1.65

      ±0.05

17.5±0.05 (2.5×7) 9-1.0±0.03

1.28±0.03

6.27±0.05

    • 5.88

      ±0.05

    • 1.31

      ±0.03

    • 1.55

      ±0.03

    • 1.75

      ±0.03

Metal mask opening area ratio: 80%

26.40±0.05

3.30±0.03 14.30±0.05

5.50±0.05 4.20±0.05

1.2±0.03

0.35±0.03 0.82±0.03

0.35±0.03 0.82±0.03

Metal mask opening area ratio:100%

(3.9)

(R)

(R)

1.60±0.03

Socket edge

    • 1.60

      ±0.03

    • 29.95

      ±0.05

Metal mask opening area ratio: 75%

panasonic-electric-works.net/ac

Sockets for memory card

Document info
Document views20
Page views20
Page last viewedSat Dec 03 10:57:09 UTC 2016
Pages8
Paragraphs788
Words3232

Comments