Manual for Life Cost Based FMEA
AIAG (1995): Potential Failure Mode and Effect Analysis (FMEA) Reference Manual, Automotive Industry Action Group. www.aiag.org, 4th edition is latest.
Bellomo, Paul (2000) and Carl E. Rago, Cherrill M. Spencer, Zane J. Wilson, “A Novel Approach to Increasing the Reliability of Acclerator Magnets”, IEEE Transactions on Applied Superconductivity, 10 (1), (2000) p. 284,
Crosby, Philip, B., (1969). Cutting the Cost of Quality: The Defect Prevention Workbook for Managers, Boston, MA, Industrial Education Institute
Ebeling, Charles, (1997). An Introduction to Reliability and Maintainability Engineering, McGraw-Hill Science/Engineering/Math, New York
Ishikawa, Kaora, (1985). What is Total Quality Control? The Japanese Way, Prentice Hall, Englewood Cliffs, London, UK, pp. 44-5.
Palady, Paul (1995) Failure Modes and Effects Analysis: Predicting and Preventing Problems Before They Occur, Atlantic Books
Rago, Carl E. (2002) and Cherrill M. Spencer, Zachary Wolf, Gerald Yocky, “High Reliability Prototype Quadrupole for the Next Linear Collider”, IEEE Transactions on Applied Superconductivity, 12 (1), (2002) p. 270
Rhee, Seung J. (2003) and Cherrill M. Spencer, “Cost based failure modes and effects analysis (FMEA) for systems of accelerator magnets”, Proceedings, Particle Accelerator Conference, May 2003. http://warrior.lbl.gov:7778/PAC_PUBLIC/view_pac.display_abstract?this_id=3327
Rhee, Seung J. (2004) and Cherrill M. Spencer, “Comparison Study of Electromagnet and Permanent Magnet Systems for an Accelerator Using Cost-Based Failure Modes and Effects Analysis “, IEEE Transactions on Applied Superconductivity, 14 (2), (2004) p.413
Stamatis, D.H (1997) Failure Mode and Effect Analysis: FMEA from Theory to Execution, ASQC/Quality Press. 2nd edition released in 2003.
Wasserman, Gary S., (2003), Reliability Verification, Testing, and Analysis in Engineering Design, Marcel Dekker Inc., NY, NY
FMEA MANUAL By S. Rhee and C.M. Spencer