X hits on this document

28 views

0 shares

0 downloads

0 comments

1 / 10

Program Track

More about programming locomotive address on the

Program Track or Main Track To program a locomotive address involves programming a series of CVs such as CV1, CV17, CV18, CV19 and CV29. This can be somewhat complicated. For most decoders, Prodigy Express automatically handles this for you when programming the loco address. However, it may fail to program some old decoders and some new sound decoders made by QSI®. It does not mean that you cannot program these decoders. It only means you cannot use the Prodigy Advance’s easy address programming feature. For QSI® decoders please refer to your decoder’s manual and use CV programming to program the loco address.

For some old decoders, you have to skip the Addr programming and use the CV program mode to program CV29 with a value of 2 and CV1 with a short address (1-127). Detailed steps are as follows:

  • 1.

    Press Prog to select Prog Prog Track

  • 2.

    Press Enter six times until CV# displays on the screen

  • 3.

    To select CV29, press 29 and Enter

  • 4.

    CV data displays. Press 2 and Enter

  • 5.

    CV# displays again. Select CV1 by pressing 1 then press Enter

  • 6.

    CV data displays. Press the loco address (1-127) and then Enter

Prodigy Express DCC System Expansion

Insulated gap

Insulated gap

Main Track #1

Main Track #2

Main Track #3

Advance

Advance

Distribution DCC

Distribution DCC

booster #1

booster #2

Prodigy Express Base Unit

Adapter

Adapter

Adapter

Extension box

Extension box

Extension box

Prodigy Express Cab

Prodigy Advance Cab

Easy installation plug and play

a

MRC Prodigy Express User’s Manual

© 2005 Model Rectifier Corporation 80 Newfield Avenue Edison, NJ 08837

www.modelrectifier.com Printed in USA

Document info
Document views28
Page views28
Page last viewedSat Dec 03 05:23:42 UTC 2016
Pages10
Paragraphs533
Words7687

Comments