Environment is an AB Volvo Group (hereinafter referred to as “Volvo”) Core Value. Suppliers of production materials, equipment, services and consumption goods play a vital part in the development and production of Volvo products. A true holistic approach means that the Volvo commitment on environmental care must be reflected in the supplier network.
This manual is intended to explain to Volvo’s suppliers what Volvo’s requirements for reporting parts material contents are. It comes in complement to the Volvo group standard STD 100-0006 & STD 100- 0007.
The requirements set out in this manual shall be fulfilled for every new & modified part delivered to Volvo Business Areas (Volvo Trucks, Volvo Buses, Volvo Penta Renault trucks, Nissan Diesel, Mack trucks) & ordered by Business Units Volvo strongly recommends the Tier 1 suppliers to pass the information to Tier 2 suppliers and so on.
The provisions contained herein do not limit in any way the Supplier’s liability regarding notably the respect of all legal and regulatory provisions.
VOLVO GROUP standard
The supplier portal is master in term of uptodate version of the VOLVO requirements. These requirements can be accessed from the supplier portal home page: http://www.volvo.com/suppliers:
Check SP apperance
1.1.1 VOLVO Standards on related processes
STD 100-0006: Reporting of substances and material composition to IMDS
STD 100-0007: STIC confirmation on the VOLVO Group Supplier Portal
STD 103-0002: Generic identification and marking of plastics and elastomer components – Marking of Material type
STD 103-0010: Marking of aluminium parts
VOLVO GROUP – Substances and material reporting detailed instructions/ Version 2.0
December 2014 Page 4 / 35