X hits on this document





8 / 8

Training Services

46575 Magellan Drive, Novi, MI 48377-2452 www.epowerplus.com

(248) 344-0200 / Fax (248) 305-9105 email: info@epowerplus.com

According to the NFPA 70E, a “Qualified Person" is one who is trained and knowledgeable of the construction and operation of the equipment or the specific work method, and be trained to recognize the hazards present. Such persons shall also be familiar with the use of the precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools and test equipment.

In addition, to be permitted to work within the limited approach of exposed energized conductors and circuit parts the person shall be trained in all of the following:

  • The skills and techniques necessary to distinguish exposed live parts from other parts of electric equipment

  • The skills and techniques necessary to determine the nominal voltage of exposed live parts

  • The minimum approach distances specified in this section corresponding to the voltages to which the qualified employee will be exposed

  • The decision making process necessary to determine the degree and extent of the hazard and the personal protective equipment and job planning necessary to perform the task safely

Do your employees meet these requirements?

Power Plus Training Services specializes in onsite nationwide "hands-on" electrical testing and safety training. We offer a variety of courses that are specifically designed to meet all of your requirements.

Courses offered include:

  • NFPA 70E Electrical Safety

  • Industrial Electrical Safety

  • Substation Safety and Operation

  • Substation Maintenance

  • Circuit Breaker Construction and Maintenance

  • Transformer Construction and Maintenance

  • NEC Courses

  • Custom Training

Power Plus Training Services has combined its technical knowledge and field expertise with sound instructional practices to offer onsite training nationwide designed to go beyond the classroom and onto the job. Unlike most third party training companies, Power Plus Training programs are real, site specific, "hands on" programs. Students walk away from our courses with confidence in their skills practiced during their training.

Courses are conducted by one of our staff of experienced and trained instructors in both the course topic and facilitation of the learning process. All Power Plus Training Services instructors are NETA certified test technicians and spend time in the field. This ensures that our instructors stay current on testing standards. The duality of field experience and instructional responsibilities of all of our instructors assures that they remain current in both the content and process of our training programs.

Document info
Document views46
Page views47
Page last viewedTue Jan 24 11:46:34 UTC 2017