X hits on this document

238 views

0 shares

0 downloads

0 comments

24 / 82

TESTING REQUIREMENTS

REFERENCE ASME B30.5a AND OSHA 1910.180 FOR COMPLETE TESTING REQUIREMENTS

TESTING SHALL BE PERFORMED BY DESIGNATED PERSONNEL ONLY.

Prior to initial use, all new, altered, modified, or extensively repaired cranes shall be tested for compliance with the operational requirements of this crane.

Test requirements:

  • 1.

    Test all functions to verify speed and operation.

  • 2.

    Check that all safety devices are working properly.

  • 3.

    Confirm operating controls comply with appropriate function labels.

  • 4.

    Test loads shall not exceed 110% of the manufacturer’s load rating.

  • 5.

    Written reports shall be maintained showing test procedures and confirming the adequacy of repairs.

3-4.0

8/16/05

Document info
Document views238
Page views238
Page last viewedFri Dec 09 06:04:20 UTC 2016
Pages82
Paragraphs3105
Words15023

Comments