X hits on this document

222 views

0 shares

0 downloads

0 comments

36 / 82

4004EH SAFETY DECAL SECTION

PART NO.:

460169000

DECAL:

REMOTE CONTROL

FUNCTION: To inform the operator of failure to follow the saftey precautions may result in equipment failure or serious personal injury.

USED ON:

QUANTITY: PLACEMENT:

All Cranes equiped with FM controls. 1

FRONT OF POWER UNIT

WARNING

REMOTE CONTROL SAFETY PRECAUTIONS

READ THE OPERATOR'S MANUAL before using the Remote Control System.

Failure to follow the safety precautions may result in equipment failure or serious personal injury.

MAKE SURE MACHINERY AND SUROUNDING AREA IS CLEAR BEFORE OPERATING REMOTE CONTROL SYSTEM. Do not activate the Remote Control System unless it is safe to do so.

TURN OFF THE RECEIVER POWER BEFORE WORKING ON THE MACHINE. Always disconnect the Remote Control System before doing any maintenance to prevent accidental operation of the machine.

DO NOT MODIFY EQUIPMENT WITHOUT WRITTEN APPROVAL FROM THE MANUFACTURER.

CARE

KEEP DRY. Do not clean the Transmitter / Receiver under high pressure. If water

or other liquids get inside the Transmitter battery or Receiver compartment, immediately dry the unit. Remove the case and let the unit air dry.

Clean the unit after operation using a damp cloth to remove any mud, dirt, concrete, etc. from the unit and prevent clogging of buttons, switches, etc.

MAINTENANCE / WELDING

DISCONNECT THE RECEIVER BEFORE WELDING ON THIS MACNINE. Failure to disconnect will result in the destruction of the Receiver.

4-4.0

02/15/06

Document info
Document views222
Page views222
Page last viewedThu Dec 08 03:18:08 UTC 2016
Pages82
Paragraphs3105
Words15023

Comments