X hits on this document

60 views

0 shares

0 downloads

0 comments

17 / 27

600

PAINTING (INTERIOR/EXTERIOR)

601

EXTERIOR PAINTING

Properly remove all dirt and grime accumulation from the surfaces to be painted using lead-safe work practices. Wet scrape and sand all loose and flaking paint. Remove loose caulking and putty. All excess hardware on the exterior surfaces will be removed and all holes filled prior to painting. Minor siding repairs will be made, in addition to re-nailing of any loose siding or trim. Use appropriate containment

according to I.A.C Ch. 70 for exterior surfaces.

Paint all exterior surfaces to cover, minimally two (2) coats - one exterior primer coat and one exterior finish coat. Use Low Volatile Organic Compound (VOC) paint. All paint will be applied according to

the manufacturers‟ windowsills, tracks, choose paint colors.

specifications.

All window sashes will be re-puttied as

sash and casing will be painted. Use paint Clear area of paint chips upon completion.

brushes,

roller

or

needed.

All exterior

pads.

The owner will

Note: Spray painting is acceptable provided the paint is brushed through and approved by owner before application. Contractor is responsible for any damage or cleanup from overspray.

602

PORCH FLOOR PAINTING

Properly scrape all loose paint from the porch floor using lead-safe work practices. Dampen to sweep dirt and debris and bag. Paint two (2) coats of quality oil base exterior floor and deck enamel. First coat to be thinned according to manufacturers‟ directions, second coat to cover, to be applied 24 hours later. Optional: Add ½ pound clean, dry, high-grade silica granules or perlite per quart of enamel to provide a

skid resistant finish.

603

INTERIOR PAINTING

Properly remove all dirt, grease, loose plaster and flaking paint from interior surfaces to be painted using lead-safe work practices. Wet scrape all loose areas of chipping or flaking paint. Clear area of paint chips upon completion. Patch small holes and cracks with spackling. Large patches will be made with patching plaster. Remove any unnecessary nails, screws and other hardware and fill all holes. All repairs

made will blend with existing surfaces. Use appropriate containment according to I.A.C Ch. 70.

Paint all interior surfaces to cover, minimally two (2) coats one interior primer and one interior latex paint, unless otherwise designated. High durability surfaces (kitchens, baths) will be painted with enamel-type paint. Use Low Volatile Organic Compound (VOC) paint. All paint will be applied according to manufacturer‟s specifications. Use paint brushes, roller or pads. The owner will choose paint colors. Clear area of paint chips upon completion.

Note: Spray painting is acceptable provided the paint is brushed through and approved by owner before application. Contractor is responsible for any damage or cleanup from overspray.

\\citycr.local\sharedocs\PublicWorks\HSG\Housing Rehab\Specs-Codes\General Specifications.doc

17

Document info
Document views60
Page views60
Page last viewedSun Dec 04 23:54:39 UTC 2016
Pages27
Paragraphs935
Words10325

Comments