SPC-1 BENCHMARK EXECUTION RESULTS REPEATABILITY TEST
Page 45 of 74
Repeatability Test Results File
The values for the SPC-1 IOPS™, SPC-1 LRT™, and the Repeatability Test measurements are listed in the tables below.
Repeatability Test Phase 1
Repeatability Test Phase 2
The SPC-1 IOPS™ values in the above table were generated using 100% of the specified Business Scaling Unit (BSU) load level. Each of the Repeatability Test Phase values for SPC-1 IOPS™ must greater than 95% of the reported SPC-1 IOPS™ Primary Metric.
Primary Metrics Repeatability Test Phase 1 Repeatability Test Phase 2
The average response time values in the SPC-1 LRT™ column were generated using 10% of the specified Business Scaling Unit (BSU) load level. Each of the Repeatability Test Phase values for SPC-1 LRT™ must be less than 105% of the reported SPC-1 LRT™ Primary Metric or less than the reported SPC-1 LRT™ Primary Metric minus one (1) millisecond (ms)..
A link to the test result file generated from each Repeatability Test Run is listed below.
Repeatability Test Phase 1, Test Run 1 (LRT) Repeatability Test Phase 1, Test Run 2 (IOPS) Repeatability Test Phase 2, Test Run 1 (LRT) Repeatability Test Phase 2, Test Run 2 (IOPS)
SPC BENCHMARK 1™ V1.12
FULL DISCLOSURE REPORT
Huawei Symantec Technologies Co., Ltd. Huawei Symantec Oceanspace™ S8100 (8-node)
Submission Identifier: A00099 Submitted for Review: NOVEMBER 11, 2010