X hits on this document

190 views

0 shares

0 downloads

0 comments

65 / 74

APPENDIX C: TESTED STORAGE CONFIGURATION (TSC) CREATION

Page 65 of 74

createrg -n RAID10_8 -l 10 -m 2 -d 1,3:1,4:1,5:3,3:3,4:3,5:5,3:5,4:5,5:7,3:7,4:7,5: createrg -n RAID10_9 -l 10 -m 2 -d 1,6:1,7:1,8:3,6:3,7:3,8:5,6:5,7:5,8:7,6:7,7:7,8: createrg -n RAID10_10 -l 10 -m 2 -d 1,9:1,10:1,11:3,9:3,10:3,11:5,9:5,10:5,11:7,9:7,10:7,11: createrg -n RAID10_11 -l 10 -m 2 -d 1,12:1,13:1,14:3,12:3,13:3,14:5,12:5,13:5,14:7,12:7,13:7,14: createrg -n RAID10_12 -l 10 -m 2 -d 1,15:1,16:1,17:3,15:3,16:3,17:5,15:5,16:5,17:7,15:7,16:7,17: createlun -i 0 -n LUN_1 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 1 -n LUN_2 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0 createlun -i 2 -n LUN_3 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 3 -n LUN_4 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0 createlun -i 4 -n LUN_5 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 5 -n LUN_6 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0 createlun -i 6 -n LUN_7 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 7 -n LUN_8 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0 createlun -i 8 -n LUN_9 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 9 -n LUN_10 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0 createlun -i 10 -n LUN_11 -s 1716606 -u 512 -c A -w 1 -m 0 -p 0 createlun -i 11 -n LUN_12 -s 1716606 -u 512 -c B -w 1 -m 0 -p 0

  • 3.

    Create disk groups and volumes

    • 3.1

      Login to the S8100 CLI console of each of the eight data controller groups and execute the www_luns.script to create a listing of WWN information for each LUN created by raid_lun.script. The following is an example to create the listing on one data controller group:

Oceanspace: admin> autobat -i 129.22.240.65 -u admin -f www_luns.script

3.2 Login to the S8100 CLI console of one of the service controllers and execute the www_elements.script, using the command listed below, to create a listing that contains the unique sd name and corresponding WWN for each LUN created by raid_lun.script.

Oceanspace: admin> autobat -i 129.22.240.75 -u admin -f www_elements.script

The information created from www_luns.script and www_elements.script document the relationship between the LUN names associated with the data controllers and the sd names associated with service controllers via the common WWN. This information is used in disk_volume.script to create disk groups, each consisting of four LUNs with the same LUN name from the four data controller groups. For example:

x

dg1 (disk group 1) contains LUNs sdan, sdb, sdbn, sdcl, sddj, sddv sdfr, and sdn each identified as LUN_1 in all eight data controller groups.

x

dg2 (disk group 2) contains LUNs sdao, sdbo, sdc, sdcm, sddk, sddw, sdfs, and sdn each identified as LUN_2 in all eight data controller groups.

3.3 Login to the S8100 CLI console of one of the service controllers and execute the disk_volume.script using the command listed below. The script will create 12 disk groups, 12 volumes, and map the 12 volumes to Windows.

Oceanspace: admin> autobat -i 129.22.240.75 -u admin -f disk_volume.script

SPC BENCHMARK 1™ V1.12

FULL DISCLOSURE REPORT

Huawei Symantec Technologies Co., Ltd. Huawei Symantec Oceanspace™ S8100 (8-node)

Submission Identifier: A00099 Submitted for Review: NOVEMBER 11, 2010

Document info
Document views190
Page views190
Page last viewedMon Dec 05 21:09:20 UTC 2016
Pages74
Paragraphs6246
Words21133

Comments