X hits on this document

PDF document

Changing Entertainment. Again. - page 16 / 68

151 views

0 shares

0 downloads

0 comments

16 / 68

Connections and Setup

  • If you choose AUTO, the VCR sets the time zone using information from the broadcast signal.

    • 6.

      When finished, press MENU to exit.

    • 7.

      Turn off the VCR to automatically set the clock.

MONTH :

JULY

DAY

:

YEAR

:

TIME

:

5 SAT 2003

2 : 15 AM

AUTO CLOCK SET : DAYLIGHT SAVING:

OFF ON

TIME ZONE:

EASTERN

SELECT ADJUST TO EXIT PRESS

Manual Clock Set

  • 1.

    Press MENU to display the VCR Main Menu.

  • 2.

    CLOCK should already be highlighted, so press OK (the Clock menu appears).

  • 3.

    MONTH: should already be highlighted. Press the right arrow button to set the month.

  • 4.

    Press the down arrow button to highlight DAY: , and press the right arrow button until the correct day is shown. The day of the week displays automatically.

  • 5.

    Press the down arrow button to highlight YEAR: , and press the right arrow button until the correct year is shown.

  • 6.

    Press the down arrow button to highlight TIME: , and press the right arrow button until the correct time is shown.

  • 7.

    Press the down arrow button until DAYLIGHT SAVING: is highlighted, and press the right arrow button until the desired setting is shown (ON, or OFF).

    • If you choose ON, the VCR adjusts the clock when the Daylight Savings Time begins or ends.

    • Remember that AUTO CLOCK SET must be set to OFF and DAYLIGHT SAVING and TIME ZONE can’t be set to AUTO when setting the time manually. Otherwise, the time will be reset when the VCR is turned off.

12

Chapter 1

Document info
Document views151
Page views151
Page last viewedFri Dec 02 18:41:10 UTC 2016
Pages68
Paragraphs2134
Words20699

Comments