Chapter 2: Using the Remote Control
Button Descriptions for DVD and VCR Modes
In addition to operating your DVD/VCR, the remote that came with it will operate most RCA, GE, and Proscan TVs. However, this section only describes the buttons on the remote that you will use with your DVD/VCR.
For descriptions of remote control buttons to be used with your TV (RCA, GE, and Proscan only), go to the next page.
DVD and VCR function buttons listed alphabetically
ON• OF F
(0-9) Number buttons Use to input information such as chapter numbers, track numbers, or to make selections on some menu screens. In VCR mode, enter channel numbers.
AGAIN Quick reverse - replays the last few seconds of a DVD movie.
ANGLE Accesses the Camera Angle icon of DVD disc Info Display. Also used to rotate JPEG files 90°.
Arrow buttons Use the arrows to navigate through the menu screens and make selections.
AUDIO Accesses the Audio icon in the Info Display that enables you to play a disc in a different language.
S U B T I T LE
T I T LE
AU DIO LOC K
CH+/- In VCR mode, selects next higher or lower channel in the channel list and adjusts tracking. In DVD mode, selects the next/preceding chapter or track when playing a disc.
CLEAR Removes on-screen menus and displays or clears menus. In VCR mode, resets the time counter.
TV• VCR FORWARD
DVD Turns on the DVD/VCR and puts the remote in DVD mode. Likewise, you can change to the VCR mode by pressing the VCR button.
FORWARD Fast forwards the tape when the VCR is in stop mode. In DVD and VCR mode, searches forward if pressed during playback. In DVD mode, during play-pause mode, this button starts slow-motion advance and each press of the button during slow-motion advance increases the speed incrementally.
S PE ED
GO BACK/RETURN Goes back to the previous menu.
INFO Shows the status displays on screen of your RCA, GE, or Proscan TV, or DVD/VCR (whichever component the remote is set to control). Displays the on-screen Info Display when playing DVD discs.
INPUT In VCR or TV mode, selects between the Video Input Channels and the tuner. Video Input Channel refers to the signal coming from the component connected to audio/ video input jacks on the DVD/VCR or TV.
Graphics contained within this publication are for representation only.