X hits on this document

PDF document

Changing Entertainment. Again. - page 36 / 68

175 views

0 shares

0 downloads

0 comments

36 / 68

VCR Features

TO

CLOCK PROGRAM TUNING SETUP

PROGRAM 1

MONTH

:

JULY

DAY

:

6 FRI

START

:

6:00 PM

STOP

:

7:30 PM

CHANNEL :

4 TV

SPEED :

SP

REPEAT :

ONCE

Reviewing and Clearing Programs To review programs that you have already set up:

  • 1.

    Press the MENU button to display the VCR Main Menu.

  • 2.

    Press the down arrow button until PROGRAM is highlighted, and press OK (the Program menu appears).

  • 3.

    Use the left and right arrow buttons to choose the program number you want to check or clear (1-8).

    • To erase a program, press CLEAR.

TO ERASE PRESS TO EXIT PRESS

Time Counter

The time counter shows the actual time used when recording or playing a tape. The time counter helps locate the beginning or end of recorded events. It resets to 0:00:00 whenever a tape is ejected from the DVD/VCR.

For example, if you record a 30–minute program at the beginning of a tape, rewind it, and then want to go to the end of the first program to start another recording:

  • 1.

    Press the INFO button twice to display only the time counter.

  • 2.

    Press the CLEAR button to reset the time counter to 0:00:00.

Hours Minutes

0:30:00

Seconds

  • 3.

    Press the remote control’s FORWARD button to advance a tape until the time counter reads 0:30:00.

  • 4.

    Press the STOP button. This is the approximate end of a 30-minute program (you may want to press the PLAY button to verify). When the tape is cued correctly, you can begin recording.

  • 5.

    Press the INFO button to remove the time counter from the screen and return to the normal display mode.

32

Chapter 4

Document info
Document views175
Page views175
Page last viewedMon Dec 05 17:04:22 UTC 2016
Pages68
Paragraphs2134
Words20699

Comments