X hits on this document

PDF document

Changing Entertainment. Again. - page 51 / 68





51 / 68

Chapter 6: Additional Information


Most problems you encounter with your product can be corrected by consulting the following troubleshooting list.

Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359. For additional assistance while using your RCA product, please visit www.rca.com/ customersupport.

General Problems Player won’t work

  • Try unplugging the AC power cord and plugging it back in.

No power

  • Plug in the DVD/VCR. Make sure both ends of the AC power cord are securely plugged into the

player and into an AC outlet.

  • Make sure the DVD/VCR isn’t plugged into an outlet controlled by a light switch.

Player turns off automatically

  • The power automatically turns off after the player has been in stop mode for approximately 30

minutes. Turn power back on.

No picture

  • Turn your TV to its Video Input Channel (go to page 62).

  • Turn on the TV.

  • Make sure your player is connected properly.

  • If you’re using component video cables to connect to your TV, toggle the progressive scan/interlace

mode (see page 44).

No sound or distorted sound

  • Make sure your player is connected properly. Make sure all cables are securely inserted into the appropriate jacks.

  • You may need to readjust the Digital Output setting (from the Sound menu). Go to page 45. If you selected DTS and your DVD/VCR isn’t connected to a DTS compatible decoder or receiver, either you won’t hear any audio, or it will be distorted. Also, if you’ve connected a DTS compatible receiver or decoder and chose the correct setting in the Digital Output menu, and the disc doesn’t support the DTS audio format, you won’t hear any audio or you’ll hear distorted audio.

  • Turn your TV to its Video Input Channel (go to page 62).

  • Sound is muted when you’re using search features (fast forward, reverse, frame advance, etc.).

  • If you connected an audio receiver to your DVD/VCR, make sure you chose the correct input setting on the receiver.

Chapter 6

Graphics contained within this publication are for representation only.


Document info
Document views236
Page views236
Page last viewedFri Jan 20 06:41:49 UTC 2017