X hits on this document

PDF document

Cisco AVVID Network Infrastructure IP Multicast Design - page 86 / 98

259 views

0 shares

0 downloads

0 comments

86 / 98

Chapter 7

Multicast Music-on-Hold and IP/TV Configurations

Multicast Music-on-Hold

Step 5

A message is displayed indicating that the MoH Servers must be reset. To reset the servers, click on Reset MoH Servers.

Configuring the IP Phones

To configure the IP Phones for Multicast MoH, do the following:

Step 1

From the CallManager Admin main page, select Device>Phone>Find and enter the search criteria. Figure 7-4 shows the Phone Configuration screen.

Figure 7-4

Call Manager—Phone Configuration

Step 2 Step 3

Select the desired phone from the list.

For the “User Hold Audio Source,” select the configured audio source (see Configuring the MoH Audio Source) from the drop-down list.

Step 4

For the “Network Hold Audio Source,” select the audio source (see Configuring the MoH Audio Source) from the drop-down list. This may be a different audio source than the one used for the user hold.

Step 5

If there is configured a MRGL for this device or audio source, select that also.

Step 6

Click on Update to save the changes.

Note

A different user and network hold source can be configured for each Directory Number (DN) listed for this device.

Cisco AVVID Network Infrastructure IP Multicast Design

7-6

956651

Document info
Document views259
Page views259
Page last viewedSat Dec 10 11:11:36 UTC 2016
Pages98
Paragraphs2650
Words25637

Comments