X hits on this document

101 views

0 shares

0 downloads

0 comments

12 / 28

Empa Activities 2005 Publications

Turkulin, H./Holzer, L./ Richter, K./Sell, J.

Application of the ESEM technique in wood research. Part II. Comparison of operational modes. Wood and Fiber Science 2005, 37(4), 565–573 (second entry; for main entry, see under first author in Dept «Civil and Mechanical Engineering», Lab «Wood»)

Utke, I./Michler, J./Gasser, Ph./ Santschi, Ch./Laub, D./ Cantoni, M./Buffat, Ph.-A./ Jiao, C./Hoffmann, P.

Cross section investigations of compositions and sub-structures of tips obtained by focused electron beam induced deposition. Advanced engineering materials 2005, 7(5), 323–331 (second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «Materials Technology»)

Winnefeld, F./Lothenbach, B./ Figi, R./Rytz, G./Plötze, M.

Einflüsse verschiedener Sulfatträger auf die Hydratation von Portlandzement – eine praxisnahe Studie. Zement Kalk Gips – ZKG international 2005, 58(3), 62–70

Brunner, A.J./Barbezat, M./ Huber, Ch./Flüeler, P.

The potential of active fiber composites made from piezoelectric fibers for actuating and sensing applications in structural health monitoring. Materials and Structures 2005, 38(279), 561–567

Brunner, A.J./Flüeler, P.

Prospects in fracture mechanics of 'engineering' laminates. Engineering fracture mechanics 2005, 72(6), 899–908

Farshad, M./Necola, A./Flüeler, P. Service life prediction of GFRP pipes in aggressive environments. In: Second int. conference on FRP composites in civil engineering (CICE 2004), Adelaide, Australia, December 8–10, 2004, p. 931– 936

Huber, Ch./Spori, D.M./ Melnykowycz, M./Barbezat, M.

Active fibre composites: optimization of the manufacturing process and their poling behavior. In: 12th Int. symposium on smart structures and materials 2005: active materials: behavior and mechanics, San Diego, CA, USA, March 6–10, 2005. Spie proceedings series, vol. 5761, p. 542–547

Kieselbach, R./Krieg, R.

Limit strains for severe accident conditions applicable for nuclear power plants. Journal of the mechanical behavior of materials 2005, 16(4–5), 345–362

Kieselbach, R./Krieg, R.

Size effect in strain limits of medium strength steel. Journal of testing and evaluation 2005, 33(5), 348–355

Materials and Engineering

Kornmann, X./Rees, M./ Thomann, Y./Necola, A./ Barbezat, M./Thomann, R.

Epoxy-layered silicate nanocomposites as matrix in glass fibre-reinforced composites. Composites science and technology 2005, 65(14), 2259–2268

Kress, G./Roos, R./ Barbezat, M./Dransfeld, C./ Ermanni, P.

Model for interlaminar normal stress in single curved laminates. Composite structures 2005, 69(4), 458–469

Melnykowycz, M./ Kornmann, X./Huber, Ch./ Brunner, A.J./Barbezat, M.

Integration of active fiber composite (AFC) sensors/actuators into glass/epoxy laminates. In: 12th Int. symposium on smart structures and materials 2005: active materials: behavior and mechanics, San Diego, CA, USA, March 6–10, 2005. Spie proceedings series, vol. 5761, p. 221–232

Michel, S.A./Kieselbach, R./ Figliolino, M.

Environmental and frequency effects on fatigue crack growth rate and paths in aluminium alloy. Fatigue & fracture of engineering materials & structures 2005, 28(1–2), 205–219

Piskoty, G./Kovacs, G./ Affolter, Ch.

Investigation into an accident caused by falling formwork using numerical dynamic simulation. Engineering failure analysis 2005, 12(6), 942–949

Piskoty, G./Michel, S.A./ Zgraggen, M.

Bursting of a corn silo – an interdisciplinary failure analysis. Engineering failure analysis 2005, 12(6), 915–929

Snedeker, J.G./Barbezat, M./ Niederer, P./Schmidlin, F.R./ Farshad, M.

Strain energy density as a rupture criterion for the kidney: impact tests on porcine organs, finite element simulation, and a baseline comparison between human and porcine tissues. Journal of biomechanics 2005, 38(5), 993–1001

Wissler, M./Mazza, E.

Modeling and simulation of dielectric elastomer actuators. Smart materials and structures 2005, 14(6), 1396–1402

Wissler, M./Mazza, E.

Modeling and finite element simulation of dielectric elastomer actuators. In: NAFEMS Seminar on numerical simulation of electromechanical systems, Wiesbaden, Germany, October 26–27, 2005, 11 p.

Wissler, M./Mazza, E.

Modeling of a pre-strained circular actuator made of dielectric elastomers. Sensors and actuators A 2005, 120(1), 184–192

Zhang, X./Löwe, Ch./Wissler, M./ Dielectric elastomers in actuator technology. Advanced engineering materials 2005, 7(5), 361–367

Jähne, B./Kovacs, G.

(second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab

«Functional Polymers»)

Science Citation Index SCI Science Citation Index SCIE (not SCI)

  • Social Science Citation Index SSCI

131

Document info
Document views101
Page views101
Page last viewedWed Jan 18 10:57:49 UTC 2017
Pages28
Paragraphs1190
Words15317

Comments