X hits on this document

87 views

0 shares

0 downloads

0 comments

5 / 28

124

Empa Activities 2005 Publications

Blugan, G./Hadad, M./ Janczak-Rusch, J./Kübler, J./ Graule, T.J.

Fractography, mechanical properties, and microstructure of commercial silicon nitride-titanium nitride composites. Journal of the American ceramic society 2005, 88(4), 926–933 (third entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «High Performance Ceramics»)

Dong, Z.Z./Kajiwara, S./ Kikuchi, T./Sawaguchi, T.

Effect of pre-deformation at room temperature on shape memory properties of stainless type Fe-15Mn-5Si-9Cr-5Ni-(0.5–1.5)NbC alloys. Acta materialia 2005, 53(15), 4009–4018

Elsener, H.R./Klotz, U.E./ Khalid, F.A./Piazza, D./Kiser, M.

The role of binder content on microstructure and properties of a Cu-base active brazing filler metal for diamond and cBN. Advanced engineering materials 2005, 7(5), 375–380

Janczak-Rusch, J.

Brazing and characterisation of advanced ceramic joints. In: 29th Int. conference on advanced ceramics and composites, Cocoa Beach, FL, USA, January 23–28, 2005. Publ.on CD and also in: ceramic engineering and science proceedings (CESP), 2005, 26(2–8). This article is published in issue 2, p. 391–398

Janczak-Rusch, J./Piazza, D./ Boccaccini, A.R.

Joining of SiC fibre reinforced borosilicate glass matrix composites to molybdenum by metal and silicate brazing. Journal of materials science 2005, 40(14), 3693–3701

Kleiner, S./Bertocco, F./ Khalid, F.A./Beffort, O.

Reactively synthesized nanostructured PM aluminium composite – microstructure stability and elevated temperature hardness response. Advanced engineering materials 2005, 7(5), 380–383 (second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «Materials Technology»)

Klotz, U.E./Henderson, M.B./ Wilcock, I.M./Davies, S./ Janschek, P./Roth, M./ Gasser, Ph./McColvin, G.

Manufacture and microstructural characterisation of bimetallic gas turbine discs. Materials science and technology 2005, 21(2), 218–224

Joining and Interface Technology

Liu, C./Klotz, U.E./ Uggowitzer, P.J./Löffler, J.F.

Thermodynamic Assessment of the Sn-Ti System. Monatshefte für Chemie 2005, 136(11), 1921–1930

Wolczynski, W./Guzik, E./ Kloch, J./Janczak-Rusch, J.

Macro/micro gradient of solute concentration during solidification of the Ni/Al/Ni interconnections. Archives of metallurgy and materials 2005, 50(1), 231–240

Materials Technology

Bandyopadhyay, P.P./ Siegmann, S.

Friction and wear behavior of vacuum plasma-sprayed Ti-Zr-Ni quasicrystal coatings. Surface and coatings technology 2005, 197(1), 1–9

Berger, B./Haas, B./Vaucher, S./ Leparoux, M./Dvorak, M./ Schreuders, C.

Synthesis, characterization and reactivity of silicon nano particles for pyrotechnical applications. In: 36th Int. annual conference of ICT combined with 32th int. pyrotechnics seminar, Karlsruhe, Germany, June 28–July 1, 2005, 13 p.

Blugan, G./Hadad, M./ Janczak-Rusch, J./Kübler, J./ Graule, T.J.

Fractography, mechanical properties, and microstructure of commercial siliconnitride-titanium nitride composites. Journal of the American ceramic society 2005, 88(4), 926–933 (second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «High Performance Ceramics»)

Domanski, K./Janus, P./

Design, fabrication and characterization of force sensors for nanorobot. Microelectronic engineering

Grabiec, P./Perez, R./Chaillet, N./ 2005, 78–79, 171–177 Fahlbusch, S./Sill, A./Fatikow, S.

Fahlbusch, S./Mazerolle, S./ Breguet, J.-M./Steinecker, A./ Agnus, J./Perez, R./Michler, J.

Nanomanipulation in a scanning electron microscope. Journal of materials processing technology 2005, 167( 2–3), 371–382

Gassilloud, R./Ballif, Ch./ Gasser, P./Bürki, G./Michler, J.

Deformation mechanisms of silicon during nanoscratching. Physica status solidi (a) 2005, 202(15), 2858–2869

Haug, F.-J./Bonderer, L./ Schwaller, P./Patscheider, J./ Tobler, M./Karimi, A.

Control of the nitrogen content in nanocomposite TiN/SiNx coatings deposited by an arc-sputter hybrid process. Composites science and technology 2005, 65(5), 799–803 (second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «Nanoscale Materials Science»)

Herzog, A./Thünemann, M./ Vogt, U./Beffort, O.

Novel application of ceramic precursors for the fabrication of composites. Journal of the European ceramic society 2005, 25(2–3), 187–192 (second entry; for main entry, see under first author in Dept «Advanced Materials and Surfaces», Lab «High Performance Ceramics»)

Science Citation Index SCI Science Citation Index SCIE (not SCI)

  • Social Science Citation Index SSCI

Document info
Document views87
Page views87
Page last viewedThu Dec 08 00:12:58 UTC 2016
Pages28
Paragraphs1190
Words15317

Comments